Nissan Almera Tino V10. Instruction — part 719
3
CHECK REVERSE POSITION INPUT SIGNAL/WITH NAVIGATION SYSTEM
1. Turn ignition switch OFF.
2. Disconnect rear AV and NAVI control unit connector.
3. Turn ignition switch ON.
4. Shift the selector lever to R-position.
5. Check voltage between AV and NAVI control unit harness connector B63 (LHD models) B115 (RHD models) terminal
32 (G/W) and ground.
MKIB0179E
Battery voltage should exist.
OK or NG
OK
©
GO TO 5.
NG
©
Check harness for open or short between AV and NAVI control unit and backup lamp
switch (M/T models) or park/neutral position switch (A/T model).
4
CHECK REVERSE POSITION INPUT SIGNAL/WITHOUT NAVIGATION SYSTEM
1. Turn ignition switch OFF.
2. Disconnect display unit connector.
3. Turn ignition switch ON.
4. Shift the selector lever to R-position.
5. Check voltage between display unit harness connector M96 terminal 7 (G/W) and ground.
YEL579E
OK or NG
OK
©
GO TO 5.
NG
©
Check harness for open or short between display unit and back up lamp switch (M/T
models) or park/neutral position switch (A/T model).
REARVIEW MONITOR
Trouble Diagnosis (Cont’d)
EL-172
5
CHECK REARVIEW CAMERA CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rearview camera control unit connector and rearview camera connector.
3. Check continuity between rearview camera control unit and rearview camera.
YEL576E
MTBL1646
OK or NG
OK
©
GO TO 6.
NG
©
Repair or replace harness.
6
CHECK REARVIEW CAMERA CONTROL UNIT OUTPUT SIGNAL
1. Connect rearview camera control unit connector.
2. Turn ignition switch ON.
3. Shift the selector lever to R-position.
4. Check voltage between rearview camera control unit harness connector B64 (LHD models) or B116 (RHD models) ter-
minal 5 (PU) and ground.
YEL605E
Approx. 6.5V
OK or NG
OK
©
GO TO 7.
NG
©
Replace rearview camera control unit.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REARVIEW MONITOR
Trouble Diagnosis (Cont’d)
EL-173
7
CHECK REARVIEW CAMERA SIGNAL
1. Connect the rearview camera connector.
2. Check voltage between rearview camera harness connector T5 (sedan models), D91 (wagon models) or B56 (hatch
back models) each terminal 2 (W) and ground.
YEL577E
OK or NG
OK
©
Replace rearview camera control unit.
NG
©
Replace rearview camera.
REARVIEW MONITOR
Trouble Diagnosis (Cont’d)
EL-174
THE REARVIEW IMAGE IS DISTORTED.
=NLEL0541S04
1
CHECK SYNCHRO SIGNAL OPEN OR SHORT CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rearview camera control unit connector and display unit.
3. Check continuity between display (with navigation system), display unit (without navigation system) and rearview cam-
era control unit.
YEL580E
MTBL1647
OK or NG
OK
©
GO TO 2.
NG
©
Repair or replace harness.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REARVIEW MONITOR
Trouble Diagnosis (Cont’d)
EL-175
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст