Nissan Almera Tino V10. Instruction — part 948
NRS127
SEAT BELTS
Precautions (Cont’d)
RS-4
Front Seat Belt
REMOVAL AND INSTALLATION
=NLRS0056
1. Slide the seat all the way forward. Tilt the seatback toward the front and remove the rear floor boxes.
2. Remove adjuster cover.
3. Remove floor anchor bolt.
4. Remove shoulder anchor bolt.
5. Remove front and rear kicking plate, then remove center pillar upper and lower garnish. Refer to BT-27,
“SIDE AND FLOOR TRIM” for details.
6. Disconnect seat belt pre-tensioner connector.
7. Remove the screw securing seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-ten-
sioner retractor.
8. Remove bolts securing seat belt adjuster, then remove seat belt adjuster.
YRS109
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SEAT BELTS
Front Seat Belt
RS-5
YRS110
SEAT BELTS
Front Seat Belt (Cont’d)
RS-6
Rear Seat Belt
REMOVAL AND INSTALLATION (MODELS WITH BUILT-IN SEAT BELT)
=NLRS0058
1. Remove the outer rear seats. Refer to BT-48, “REAR SEAT” for details.
2. Remove lower seat trim.
3. Remove the special bolts, using the TAMPER RESISTANT TORX (Size T50) and seat belt buckles can
be removed.
4. Remove the center seat. Refer to BT-48, “REAR SEAT” for details.
5. Remove lower seat trim and rear back seat garnish.
6. Remove the special bolts, using the TAMPER RESISTANT TORX (Size T50) and the seat belt - bracket,
- retractor and - buckle can be removed.
7. Remove rear side garnish. Refer to BT-27, “SIDE AND FLOOR TRIM” for details.
8. Remove bolts securing rear seat belt retractor, then remove seat belt and seat belt retractor.
YRS106
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SEAT BELTS
Rear Seat Belt
RS-7
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст