Nissan Murano. Instruction — part 921
IP-20
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
29. Remove speaker grille RH.
Pull up speaker grille RH (1).
30. Remove front squawker RH. Refer to the following.
• For Base audio without color display: Refer to
AV-43, "Removal and Installation"
.
• For Base audio with color display: Refer to
AV-153, "Removal and Installation"
• For Bose audio without navigation: Refer to
AV-280, "Removal and Installation"
.
• For Bose audio with navigation: Refer to
AV-452, "Removal and Installation"
.
31. Remove optical sensor (XENON headlamp models). Refer to
EXL-183, "Removal and Installation"
.
32. Remove instrument lower panel RH.
1.
Remove instrument lower panel RH (1) fixing screws (A).
2.
Open the glove box lid (2).
3.
Remove instrument lower panel RH fixing screws (B).
4.
Pull back instrument lower panel RH.
5.
Disconnect harness connector.
33. Disconnect front passenger air bag module connector. Refer to
.
34. Remove front passenger air bag module fixing bolt. Refer to
: Pawl
JMJIA1329ZZ
: Pawl
: Metal clip
JMJIA1330ZZ
INSTRUMENT PANEL ASSEMBLY
IP-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
35. Remove instrument panel assembly (1) mounting screws (A) and bolt (B).
36. Remove instrument panel assembly.
CAUTION:
• Cover center console upper surface with a shop cloth to prevent it from being damaged.
• When removing instrument panel assembly, 2 workers are required so as to prevent it from drop-
ping.
37. Remove the following parts after removing instrument panel assembly.
• Passenger air bag module. Refer to
SR-18, "Removal and Installation"
.
• Ventilator duct. Refer to
VTL-53, "VENTILATOR DUCT : Removal and Installation"
.
• Upper ventilator duct. Refer to
VTL-54, "UPPER VENTILATOR DUCT : Removal and Installation"
.
• Defroster nozzle and side defroster nozzle LH/RH. Refer to
VTL-55, "DEFROSTER NOZZLE AND SIDE
DEFROSTER NOZZLE : Removal and Installation"
.
• Side defroster grille LH/RH. Refer to
VTL-52, "SIDE DEFROSTER GRILLE : Removal and Installation"
• Side ventilator grille LH/RH. Refer to
VTL-50, "SIDE VENTILATOR GRILLE : Removal and Installation"
• Antenna feeder
- Base audio without color display: Refer to
.
- Base audio with color display: Refer to
- BOSE audio without navigation: Refer to
- BOSE audio with navigation: Refer to
.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the steering wheel mounting nut after removal, replace with the new nut.
• Never use the driver air bag mounting bolts after removal, replace with the new bolts.
• Never use the passenger air bag mounting bolt after removal, replace with the new bolt.
JMJIA1331ZZ
IP-22
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009719641
1.
Instrument lower cover RH
2.
Instrument lower cover LH
3.
Instrument stay LH
4.
Front console bracket
5.
Console reinforcement
6.
Lower console finisher LH
7.
Console harness
8.
Inside key antenna
9.
Rear console pocket
10. Console mask
11.
Console rear finisher
12. Center console assembly
13. Socket and bulb
14. Console finisher assembly
15. Cup holder assembly
16. Ashtray
17. Cigarette lighter ring
18. Cigarette lighter complete
19. Socket knob
20. Socket inner case
21. Console mat
22. Console switch finisher
23. USB connector
24. Lower console assembly
25. Auxiliary input jacks
26. Socket knob
27. Socket ring
28. Socket inner case
29. Lower console finisher RH
30. Front console pocket
JSJIA0058ZZ
CENTER CONSOLE ASSEMBLY
IP-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009719642
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1.
Remove selector lever knob. Refer to
TM-167, "Removal and Installation"
.
2.
Remove console finisher assembly.
1.
Open the console lid.
2.
Remove console finisher assembly (1) fixing pawls and
metal clips with remover tool (A).
3.
Pull up console finisher assembly.
4.
Disconnect harness connectors.
3.
Remove front console pocket.
1.
Remove front console pocket (1) fixing screw (A).
2.
Pull up front console pocket, and then disengage metal
clips.
3.
Disconnect harness connectors.
4.
Remove rear console pocket.
1.
Open the rear console pocket (1).
2.
Release rear console pocket lock.
5.
Remove console rear finisher.
1.
Remove console mask (1) with flat-bladed screwdriver (A).
: Pawl
: Metal clip
JMJIA1334ZZ
: Metal clip
JMJIA1335ZZ
JMJIA1336ZZ
: Pawl
JMJIA1337ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст