Nissan Murano. Instruction — part 413
POWER WINDOW DOWN FUNCTION DOES NOT OPERATE WITH KEY CYLIN-
DER OPERATION
DLK-263
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
POWER WINDOW DOWN FUNCTION DOES NOT OPERATE WITH KEY
CYLINDER OPERATION
Diagnosis Procedure
INFOID:0000000009719137
1.
CHECK DOOR KEY CYLINDER OPERATION
Check door key cylinder operation.
Does door lock/unlock with door key cylinder switch operation?
YES
>> GO TO 2.
NO
>> Go to
DLK-259, "Diagnosis Procedure"
2.
CHECK POWER WINDOW OPERATION
Check power window operation.
Does power window up/down with power window main switch?
YES
>> GO TO 3.
NO
>> Go to
PWC-103, "Diagnosis Procedure"
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-264
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
Description
INFOID:0000000009719138
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent key is removed from key slot.
• All doors are closed.
Diagnosis Procedure
INFOID:0000000009719139
1.
CHECK INTELLIGENT KEY
For Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the
vehicle to be checked.
Does the Intelligent Key belong to the vehicle to checked?
YES
>> GO TO 2.
NO
>> Check Intelligent Key button operation with registered Intelligent Key belonging to the vehicle.
2.
CHECK INTELLIGENT KEY LOW BATTERY WARNING
Check that the Intelligent Key low battery warning is operated.
Is the Intelligent Key low battery warning operated?
YES
>> GO TO 6.
NO-1
>> With another registered Intelligent Key: GO TO 3.
NO-2
>> Without another registered Intelligent Key: GO TO 4.
3.
CHECK INTELLIGENT KEY BUTTON OPERATION
Check that door lock and unlock can be performed by operating the buttons of another registered Intelligent
Key.
Can door lock and unlock be performed with another registered Intelligent Key?
YES
>> GO TO 4.
NO
>> GO TO 7.
4.
CHECK ENGINE START
Insert Intelligent Key into the key slot. Operate the push-button ignition switch, and check that the vehicle is in
START status.
Is the vehicle in START status?
YES
>> GO TO 6.
NO
>> GO TO 5.
5.
CHECK INTELLIGENT KEY
Check the inside of the Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits
for damage.
Is the vehicle in START status?
YES
>> GO TO 6.
NO
>> Replace Intelligent Key.
6.
CHECK INTELLIGENT KEY BATTERY
Check the Intelligent Key battery.
Refer to
DLK-127, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Replace Intelligent Key battery.
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
DLK-265
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
7.
CHECK POWER DOOR LOCK OPERATION
Check door lock/unlock using door lock and unlock switch.
Does door lock/unlock using door lock and unlock switch?
YES
>> GO TO 8.
NO
>> Refer to
DLK-257, "ALL DOOR : Diagnosis Procedure"
.
8.
CHECK REMOTE KEYLESS ENTRY RECEIVER
Check remote keyless entry receiver.
Refer to
DLK-112, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 9.
NO
>> Repair or replace the malfunctioning parts.
9.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 10.
NO
>> Repair or replace the malfunctioning parts.
10.
REPLACE INTELLIGENT KEY
1.
Replace Intelligent Key.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Replace BCM. Refer to
DLK-266
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH INTELLIGENT
KEY
SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH INTELLI-
GENT KEY
Description
INFOID:0000000009719140
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent key is removed from key slot.
• All doors are closed.
Diagnosis Procedure
INFOID:0000000009719141
1.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>> GO TO 2.
NO
>> Go to
DLK-257, "ALL DOOR : Diagnosis Procedure"
.
2.
CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
Check “DOOR LOCK-UNLOCK SET” setting in “WORK SUPPORT”.
Refer to
DLK-55, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “DOOR LOCK-UNLOCK SET” of “WORK SUPPORT”.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст