Nissan Murano. Instruction — part 11
ADP-36
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Sensors
OUTPUT PARTS
INTELLIGENT KEY INTERLOCK FUNCTION
Tilt & telescopic switch
The following switch is installed.
• Tilt switch
• Telescopic switch
The specific parts can be operated with the operation of each switch.
Door mirror remote control switch
The following switch is installed.
• Mirror switch
• Changeover switch
The specific parts can be operated with the operation of each switch.
Item
Function
Item
Function
Door mirror sensor
(driver side/passenger side)
Detect the up/down and left/right position of outside mirror face.
Tilt and telescopic sensor
Detect the up/down and left/right position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt and telescopic motor
Move the steering column upward/downward and frontward/rearward.
Lifting motor (front)
Move the seat lifting (front) upward/downward.
Lifting motor (rear)
Move the seat lifting (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat frontward/rearward.
Memory indicator
Illuminates or flashes according to the registration/operation status.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-37
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION : System Diagram
INFOID:0000000009720650
INTELLIGENT KEY INTERLOCK FUNCTION : System Description
INFOID:0000000009720651
OUTLINE
When unlocking doors by using Intelligent Key or door request switch (driver side), seat slide and steering tilt
move directly to the exit assist function.
Other loads move to the exit assist function after performing memory function.
After performs the entry assist function.
OPERATION PROCEDURE
1.
Unlock doors by using Intelligent Key or door request switch (driver side) .
2.
The system performs exit assist operation and memory operation.
NOTE:
Further information for Intelligent Key interlock function. Refer to
ADP-9, "MEMORY STORING : Description"
.
OPERATION CONDITION
Satisfy all of the following items. The Intelligent Key interlock function is not performed if these items are not
satisfied.
DETAIL FLOW
JMJIA2855GB
Item
Request status
Ignition position
OFF
Switch inputs
• Power seat switch
• Tilt & telescopic switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
Selector lever
P position
ADP-38
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Order
Input
Output
Control unit condition
1
• Door unlock signal
(CAN)
• Key ID signal (CAN)
—
Driver seat control unit receives the door unlock signal and the key
ID signal from BCM when unlocking the door with Intelligent Key or
driver side door request switch.
2
—
—
Driver seat control unit performs the seat slide and steering tilt move
directly to the exit assist function. Other loads move to the exit assist
function after performing memory function.
3
—
—
Driver seat control unit performs the entry assist function.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-39
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION : Component Parts Location
INFOID:0000000009720652
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M75, M104
3.
Combination meter
4.
Tilt & telescopic switch M102
5.
Key slot M99
6.
Seat memory switch D13
7.
Door mirror remote control switch
D14
8.
Front door switch (driver side) B34
9.
Tilt motor M116
JMJIA1409ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст