Nissan Murano. Instruction — part 103
AV-190
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)
DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)
Description
INFOID:0000000009721722
During on board diagnosis the diagnosis function of TEL adapter unit starts with the operation of the steering
switch and performs the diagnosis when ignition switch ACC.
On Board Diagnosis Function
INFOID:0000000009721723
ON BOARD DIAGNOSIS ITEM
The on board diagnosis has 3 modes: the self-diagnosis mode that performs the trouble diagnosis, the
speaker adaptation data deleting mode and the hands-free phone system initialization mode.
CAUTION:
• Perform the diagnosis with the vehicle stopped.
• Perform STEP2 if necessary.
Self-diagnosis results
Self-diagnosis mode reads out the self-diagnosis results.
NOTE:
• Error count is read out simultaneously when reading out the DTC name.
• The errors are read out continuously when some errors occur at the same time.
Self-diagnosis results
The Details of Error Count
The error count guides “0” when the error occurs. The next time it counts up “1” if it is normal with the ignition
switch ON. It continues the count up unless the initialization of hands-free phone system is performed.
STEP
MODE
Description
STEP1
Self-diagnosis
The self-diagnosis mode performs the microphone test and
the diagnosis of TEL adapter unit, TEL antenna and steering
unit, and then reads out the results with the sound and indi-
cates them on the display.
STEP2
Speaker adaptation data deleting
The speaker adaptation data deleting mode can delete the
speaker adaptation data.
Hands-free phone system initialization
Hands-free phone system initialization mode can perform
the initialization of hands-free phone system.
DTC
DTC name
Possible causes
DTC 10000
INTERNAL FAILURE
TEL adapter unit
DTC 01000
ANT. SHORT TO BATT OR OPEN
TEL antenna
DTC 00100
ANT. SHORT TO GROUND
DTC 00010
STEERING REMOTE BUTTON STUCK A
Steering switch
DTC 00001
STEERING REMOTE BUTTON STUCK B
DTC 00000
THERE ARE NO FAILURE RECORDS TO REPORT
—
AV
DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)
AV-191
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FLOW CHART OF TROUBLE DIAGNOSIS
JSNIA2498GB
AV-192
< ECU DIAGNOSIS INFORMATION >
[BOSE AUDIO WITHOUT NAVIGATION]
AV CONTROL UNIT
ECU DIAGNOSIS INFORMATION
AV CONTROL UNIT
Reference Value
INFOID:0000000009721724
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
CONSULT MONITOR ITEM
TERMINAL LAYOUT
PHYSICAL VALUES
Monitor Item
Condition
Value/Status
VHCL SPD SIG
Ignition switch
ON
Vehicle speed > 0 km/h (0 MPH)
On
Vehicle speed = 0 km/h (0 MPH)
Off
PKB SIG
Ignition switch
ON
Parking brake is applied.
On
Parking brake is released.
Off
ILLUM SIG
Ignition switch
ON
Lighting switch is ON
On
Lighting switch is OFF
Off
IGN SIG
Ignition switch
ON
—
On
Ignition switch
ACC
—
Off
REV SIG
Ignition switch
ON
Selector lever is in R position
On
Selector lever is in any position other than R
Off
JSNIA2830ZZ
AV
AV CONTROL UNIT
AV-193
< ECU DIAGNOSIS INFORMATION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
6
(BR)
15
(L)
Steering switch signal A
Input
Ignition
switch
ON
Keep pressing SOURCE
switch.
0 V
Keep pressing MENU UP
switch.
0.7 V
Keep pressing MENU
DOWN switch.
1.3 V
Keep pressing
switch
2.0 V
Except for above.
3.3 V
7
(W)
Ground
ACC power supply
Input
Ignition
switch
ACC
—
Battery voltage
9
(R)
Ground
Illumination signal
Input
Ignition
switch
OFF
Lighting switch is OFF.
0 V
Lighting switch is ON.
12.0 V
16
(G)
15
(L)
Steering switch signal B
Input
Ignition
switch
ON
Keep pressing VOL DOWN
switch.
0 V
Keep pressing VOL UP
switch.
0.7 V
Keep pressing
switch.
1.3 V
Except for above.
3.3 V
19
(Y)
Ground
Battery power supply
Input
Ignition
switch
OFF
—
Battery voltage
20
(B)
Ground
Ground
—
Ignition
switch
ON
—
0 V
36
(GR)
Ground
Signal VCC
Output
Ignition
switch
ACC
—
9.0 V
37
(SB)
Ground
Signal ground
—
Ignition
switch
OFF
—
0 V
38
(G)
Ground
Horizontal synchronizing
(HP) signal
Input
Ignition
switch
ON
—
39
(L)
Ground
Communication signal
(DISP
→
CONT)
Input
Ignition
switch
ON
When adjusting display
brightness.
SKIB3601E
PKIB5039J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст