Nissan Murano. Instruction — part 658
EXL-44
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
FRONT FOG LAMP CIRCUIT
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK FRONT FOG LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the front fog lamp harness connector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK FRONT FOG LAMP GROUND CIRCUIT OPEN CIRCUIT
Check continuity between the front fog lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front fog lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E345
86
Fog
Battery
voltage
Off
0 V
LH
87
Fog
Battery
voltage
Off
0 V
IPDM E/R
Front fog lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E345
86
E402
1
Existed
LH
87
E331
1
Front fog lamp
Ground
Continuity
Connector
Terminal
RH
E402
2
Existed
LH
E331
2
PARKING LAMP CIRCUIT
EXL-45
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING LAMP CIRCUIT
Component Function Check
INFOID:0000000009722911
1.
CHECK PARKING LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
.
2.
Check that the parking lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the parking lamp is turned ON.
Is the parking lamp turned ON?
YES
>> Parking lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009722912
1.
CHECK PARKING LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK PARKING LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the parking lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK PARKING LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK PARKING LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect the parking lamp connector.
2.
Turn the ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
TAIL
: Parking lamp ON
Off
: Parking lamp OFF
Unit
Location
Fuse No.
Capacity
Parking lamp
IPDM E/R
#52
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E346
91
Not existed
LH
92
EXL-46
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
PARKING LAMP CIRCUIT
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK PARKING LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the parking lamp harness connector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between the parking lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front combination lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E346
91
TAIL
Battery
voltage
Off
0 V
LH
92
TAIL
Battery
voltage
Off
0 V
IPDM E/R
Parking lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E346
91
E330
2
Existed
LH
92
E329
2
Parking lamp
Ground
Continuity
Connector
Terminal
RH
E330
1
Existed
LH
E329
1
FRONT SIDE MARKER LAMP CIRCUIT
EXL-47
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT SIDE MARKER LAMP CIRCUIT
Component Function Check
INFOID:0000000009722913
NOTE:
Check the parking lamp circuit if the parking lamp and the front side marker lamp are not turned ON. Refer to
EXL-45, "Component Function Check"
.
1.
CHECK FRONT SIDE MARKER LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
.
2.
Check that the front side marker lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the front side marker lamp is turned ON.
Is the front side marker lamp turned ON?
YES
>> Front side marker lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009722914
1.
CHECK FRONT SIDE MARKER LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK FRONT SIDE MARKER LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the front side marker lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK FRONT SIDE MARKER LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK FRONT SIDE MARKER LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect the front side marker lamp connector.
TAIL
: Front side marker lamp ON
Off
: Front side marker lamp OFF
Unit
Location
Fuse No.
Capacity
Front side marker lamp
IPDM E/R
#52
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E346
91
Not existed
LH
92
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст