Nissan Murano. Instruction — part 6
ADP-16
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Sensors
OUTPUT PARTS
MANUAL FUNCTION
Tilt & telescopic switch
The following switch is installed.
• Tilt switch
• Telescopic switch
The specific parts can be operated with the operation of each switch.
Door mirror remote control switch
The following switch is installed.
• Mirror switch
• Changeover switch
The specific parts can be operated with the operation of each switch.
Item
Function
Item
Function
Door mirror sensor
(driver side/passenger side)
Detect the up/down and left/right position of outside mirror face.
Tilt and telescopic sensor
Detect the up/down and left/right position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt and telescopic motor
Move the steering column upward/downward and frontward/rearward.
Lifting motor (front)
Move the seat lifting (front) upward/downward.
Lifting motor (rear)
Move the seat lifting (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat frontward/rearward.
Memory indicator
Illuminates or flashes according to the registration/operation status.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MANUAL FUNCTION : System Diagram
INFOID:0000000009720634
MANUAL FUNCTION : System Description
INFOID:0000000009720635
OUTLINE
The driving position (seat, steering column and door mirror position) can be adjusted instructionly with power seat
switch, tilt & telescopic switch and door mirror remote control switch.
OPERATION PROCEDURE
1.
Turn ignition switch ON.
2.
Operate power seat switch, tilt & telescopic switch or door mirror remote control switch.
3.
The driver seat, steering column or door mirror operates according to the operation of each switch.
NOTE:
Seat operates only up to two places at the same time.
DETAIL FLOW
Seat
Tilt & Telescopic
JMJIA1460GB
Order
Input
Output
Control unit condition
1
Power seat switch
(sliding, lifting, reclin-
ing)
—
The power seat switch signal is inputted to the driver seat control
unit when the power seat switch is operated.
2
—
Motors
(sliding, lifting, reclin-
ing)
The driver seat control unit outputs signals to each motor accord-
ing to the power seat switch input signal.
ADP-18
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Door Mirror
NOTE:
The door mirrors can be operated instructionly when ignition switch is in either ACC or ON position. The ignition
switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and
from the driver seat control unit to the automatic drive positioner control unit via UART communication.
UART communication line malfunction and CAN communication line malfunction are detected, the door mirror
cannot be operated.
Order
Input
Output
Control unit condition
1
Tilt & telescopic switch
—
The tilt & telescopic switch signal is inputted to the automatic
drive positioner control unit when the tilt & telescopic switch is op-
erated.
2
—
Motors
(Tilt, telescopic)
The automatic drive positioner control unit actuates each motor
according to the operation of the tilt & telescopic switch.
Order
Input
Output
Control unit condition
1
Door mirror remote
control switch
—
The door mirror remote control switch signal is inputted to the au-
tomatic drive positioner control unit when the door mirror remote
control switch is operated.
2
—
Motors
(Door mirror motor)
The automatic drive positioner control unit actuates each motor
according to the operation of the door mirror remote control switch.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MANUAL FUNCTION : Component Parts Location
INFOID:0000000009720636
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M75, M104
3.
Combination meter
4.
Tilt & telescopic switch M102
5.
Key slot M99
6.
Seat memory switch D13
7.
Door mirror remote control switch
D14
8.
Front door switch (driver side) B34
9.
Tilt motor M116
JMJIA1409ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст