Nissan Murano. Instruction — part 149
AV-374
< BASIC INSPECTION >
[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS AND REPAIR WORK FLOW
2.
DIAGNOSIS WITH CONSULT
1.
Connect CONSULT and perform a self-diagnosis for “MULTI AV” and “AVM” (models with BSW and
LDW). Refer to
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” or “AVM” (models with BSW and LDW) is not dis-
played.
2.
When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
Is DTC displayed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
TROUBLE DIAGNOSIS FOR DTC
1.
Check the DTC indicated in the self-diagnosis results.
2.
Perform the relevant diagnosis referring to the DTC Index. Refer to
>> GO TO 5.
4.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5.
5.
ERROR PART REPAIR
1.
Repair or replace the identified malfunctioning parts.
2.
Perform a self-diagnosis for “MULTI AV” and “AVM” (models with BSW and LDW) with CONSULT.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC
has been indicated in the self-diagnosis results.
3.
Check that the symptom does not occur.
Does the symptom occur?
YES
>> GO TO 1.
NO
>> INSPECTION END
AV
ADDITIONAL SERVICE WHEN REPLACING (AV CONTROL UNIT)
AV-375
< BASIC INSPECTION >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ADDITIONAL SERVICE WHEN REPLACING (AV CONTROL UNIT)
Description
INFOID:0000000009721862
BEFORE REPLACEMENT
When replacing AV control unit, save or print current vehicle specification with CONSULT configuration before
replacement.
AFTER REPLACEMENT
CAUTION:
When replacing AV control unit, you must perform “After Replace ECU” or “Instruction Configuration”
with CONSULT.
• Complete the procedure of “After Replace ECU” or “Instruction Configuration” in order.
• If you set incorrect “After Replace ECU” or “Manual Configuration”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
Work Procedure
INFOID:0000000009721863
1.
SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform “Before Replace ECU” to save or print current vehicle specification. Refer to
NOTE:
If “Before Replace ECU” can not be used, use the “Instruction Configuration”.
>> GO TO 2.
2.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to
>> GO TO 3.
3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform “After Replace ECU” or “Instruction Configuration” to write vehicle specification. Refer to
.
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
AV-376
< BASIC INSPECTION >
[BOSE AUDIO WITH NAVIGATION]
CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT)
Description
INFOID:0000000009721864
• Since vehicle specifications are not included in the AV control unit after replacement, it is required to write
vehicle specifications with CONSULT.
• Configuration has three functions as follows.
Work Procedure
INFOID:0000000009721865
1.
WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit>>GO TO 2.
To write vehicle specification into the AV control unit by hand>>GO TO 3.
2.
WRITE STORED DATA
CONSULT Configuration
Select “After Replace ECU” in “Read/Write Configuration.” Write data stored in CONSULT with the “Before
Replace ECU” function into the AV control unit.
>> GO TO 4.
3.
MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Perform “Instruction Configuration.” Refer to the Configuration List to write vehicle specification into the AV con-
trol unit. Refer to
.
NOTE:
If selection items are not displayed on the CONSULT screen, touch “NEXT.”
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
Configuration List
INFOID:0000000009721866
CAUTION:
Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifica-
tions are misread.
NOTE:
• The items shown in this list depend on vehicle specifications.
• The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
Function
Description
Read/Write Configuration
Before Replace ECU
Allows the reading of vehicle specification written in AV control unit
to store the specification in CONSULT.
After Replace ECU
Allows the writing of the vehicle information stored in CONSULT
into the AV control unit.
Instruction Configuration
Allows the writing of the vehicle specification into the AV control
unit by hand.
AV
CONFIGURATION (AV CONTROL UNIT)
AV-377
< BASIC INSPECTION >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: In the following table, find an illustration that the
part matches the vehicle and select microphone type.
MANUAL SETTING ITEM
Detail
Items
Setting value
STEERING
LHD
LHD models
RHD
RHD models
CAMERA SYSTEM
REAR CAMERA
With rear view monitor system
REAR+SIDE
With rear view monitor system and
front-side view monitor function
SOUND SYSTEM
BASE
Without BOSE system
BOSE
With BOSE system
MICROPHONE
DIRECTIONAL MIC
With directional microphone
*
NON-DIRECTIONAL MIC
With non-directional microphone
*
AFFORDABLE ITS
WITH
With BSW and LDW
WITHOUT
Without BSW and LDW
Directional microphone
Non-directional microphone
: Microphone installation position
: Microphone installation position
: Microphone installation position
: Microphone installation position
: Microphone installation position
: Microphone installation position
JSNIA5541ZZ
JSNIA5542ZZ
JSNIA5543ZZ
JSNIA5544ZZ
JSNIA5545ZZ
JSNIA5546ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст