Nissan Murano. Instruction — part 53
ADP-204
< SYMPTOM DIAGNOSIS >
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009720794
1.
CHECK SYSTEM SETTING
1.
Check system setting.
Refer to
ADP-11, "SYSTEM SETTING : Special Repair Requirement"
.
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is OK.
NO
>> GO TO 2.
2.
PERFORM SYSTEM INITIALIZATION
1.
Perform system initialization.
Refer to
ADP-9, "SYSTEM INITIALIZATION : Special Repair Requirement"
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is OK.
NO
>> GO TO 3.
3.
CHECK FRONT DOOR SWITCH (DRIVER SIDE)
Check front door switch (driver side).
Refer to
DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
INTELLIGENT KEY INTERLOCK FUNCTION DOES NOT OPERATE
ADP-205
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009720795
1.
CHECK DOOR LOCK FUNCTION
Check door lock function.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
PERFORM MEMORY STORING PROCEDURE
1.
Perform memory storing procedure.
Refer to
ADP-10, "MEMORY STORING : Special Repair Requirement"
.
2.
Check Intelligent Key interlock function.
Refer to
ADP-37, "INTELLIGENT KEY INTERLOCK FUNCTION : System Description"
.
Is the inspection result normal?
YES
>> Intelligent Key inter lock function is normal.
NO
>> Replace driver seat control unit. Refer to
ADP-206
< SYMPTOM DIAGNOSIS >
ALL COMPONENTS OF TILT & TELESCOPIC SWITCH DO NOT OPERATE
ALL COMPONENTS OF TILT & TELESCOPIC SWITCH DO NOT OPERATE
Diagnosis Procedure
INFOID:0000000009720796
1.
CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT
Check tilt & telescopic switch ground circuit.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
NORMAL OPERATING CONDITION
ADP-207
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
NORMAL OPERATING CONDITION
Description
INFOID:0000000009720797
The following symptoms are normal operations, and they do not indicate a malfunction.
Symptom
Cause
Action to take
Reference page
Entry/exit assist function and
seat synchronization do not op-
erate.
No initialization has been performed.
Perform initialization.
Entry/exit assist function is disabled.
NOTE:
The entry/exit assist function and seat
synchronization function are disabled be-
fore delivery (initial setting).
Change the settings.
Entry assist function does not op-
erate.
Instruction operation with power seat switch
was performed after exit assist function
execution.
Perform the memory
function.
Lumbar support does not per-
form memory operation.
The lumbar support system are con-
trolled independently with no link to the
automatic drive positioner system.
—
Lumbar support system:
Memory function, entry/exit as-
sist function, or Intelligent Key in-
terlock function does not
operate.
The operating conditions are not fulfilled.
Fulfill the operation
conditions.
Memory function:
Exit assist function:
Entry assist function:
Intelligent Key interlock
function:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст