Nissan Murano. Instruction — part 416
HAZARD AND BUZZER REMINDER DOES NOT OPERATE
DLK-275
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD AND BUZZER REMINDER DOES NOT OPERATE
Description
INFOID:0000000009719158
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent Key is removed from key slot.
• Ignition switch is in OFF position.
• No Intelligent Keys are inside the vehicle.
Diagnosis Procedure
INFOID:0000000009719159
1.
CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to
DLK-55, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “HAZARD ANSWER BACK” in “WORK SUPPORT”.
2.
CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”
Check “ANS BACK I-KEY LOCK” setting in “WORK SUPPORT”.
Refer to
DLK-55, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.
3.
CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”
Check “ANS BACK I-KEY UNLOCK” setting in “WORK SUPPORT”.
Refer to
DLK-55, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.
4.
CHECK HAZARD WARNING LAMP
Check hazard warning lamp.
Refer to
DLK-138, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-125, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-276
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
KEY REMINDER FUNCTION DOES NOT OPERATE
KEY REMINDER FUNCTION DOES NOT OPERATE
Description
INFOID:0000000009719160
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Understand the operation when does it work, refer to
DLK-35, "KEY REMINDER FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000009719161
1.
CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”
Check “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
Refer to
DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
2.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(console).
(luggage room).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to
DLK-121, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
KEY WARNING DOES NOT OPERATE
DLK-277
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY WARNING DOES NOT OPERATE
Description
INFOID:0000000009719162
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-37, "WARNING FUNCTION : System
.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000009719163
1.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-136, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK KEY SLOT
Check key slot.
Refer to
DLK-129, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-135, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
DLK-131, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-278
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
OFF POSITION WARNING DOES NOT OPERATE
OFF POSITION WARNING DOES NOT OPERATE
Description
INFOID:0000000009719164
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-37, "WARNING FUNCTION : System
.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000009719165
1.
CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>> GO TO 2.
NO
>> Check DTC for BCM. Refer to
2.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-136, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-125, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст