Nissan Murano. Instruction — part 324
DAS-186
< REMOVAL AND INSTALLATION >
[BSW]
BSW INDICATOR
REMOVAL AND INSTALLATION
BSW INDICATOR
Removal and Installation
INFOID:0000000009723394
REMOVAL AND INSTALLATION
Removal
1.
Remove the door mirror corner cover. Refer to
MIR-72, "DOOR MIRROR ASSEMBLY : Removal and
.
2.
Remove the BSW indicator mounting screw.
3.
Remove the BSW indicator from door mirror corner cover.
Installation
Install in the reverse order of removal.
DAS
CAMERA CONTROL UNIT
DAS-187
< REMOVAL AND INSTALLATION >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
CAMERA CONTROL UNIT
Exploded View
INFOID:0000000009723395
Removal and Installation
INFOID:0000000009723396
REMOVAL
CAUTION:
Before replacing camera control unit, perform “Read/Write Configuration” to save or print current
vehicle specification. For details, refer to
.
1.
Remove luggage side finisher lower (RH). Refer to
INT-35, "Removal and Installation"
2.
Disengage air tube clip from camera control unit bracket.
3.
Remove camera control unit screws, disconnect camera control unit connector and remove the camera
control unit.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Must be perform additional service when replacing camera control unit. Refer to
.
Camera control unit
JPNIA0796ZZ
DAS-188
< REMOVAL AND INSTALLATION >
[BSW]
REAR VIEW CAMERA
REAR VIEW CAMERA
Exploded View
INFOID:0000000009723397
Removal and Installation
INFOID:0000000009723398
REMOVAL
1.
Remove back door finisher inner. Refer to
INT-38, "Removal and Installation"
2.
Remove finisher.
3.
Disconnect air tube and washer tube from rear view camera.
4.
Remove rear view camera mounting screws, disconnect rear view camera connector and remove rear
view camera from back door assembly.
CAUTION:
To prevent a malfunction resulting from a short circuit, never allow washer fluid to drip from tube
to rear view camera and connector.
INSTALLATION
Install in the reverse order of removal.
Rear view camera
Finisher
JSOIA0656ZZ
DAS
PUMP CONTROL UNIT
DAS-189
< REMOVAL AND INSTALLATION >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
PUMP CONTROL UNIT
Exploded View
INFOID:0000000009723399
Removal and Installation
INFOID:0000000009723400
REMOVAL
1.
Remove luggage floor front finisher. Refer to
INT-35, "Removal and Installation"
.
2.
.
3.
Remove pump control unit mounting screws, disconnect pump control unit harness connector and remove
pump control unit.
INSTALLATION
Install in the reverse order of removal.
Luggage trim bracket
Pomp control unit
: Vehicle front
JSOIA0661ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст