Nissan Murano. Instruction — part 1302

SRC-56

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

B1416, B1417, B1418, B1419, B1420 AIR BAG DIAGNOSIS SENSOR UNIT

B1416, B1417, B1418, B1419, B1420 AIR BAG DIAGNOSIS SENSOR UNIT

DTC Logic

INFOID:0000000009718519

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?

YES

>> Refer to

SRC-56, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009718520

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

CHECK HARNESS CONNECTOR

Check the harness connector.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace harness connectors.

2.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace wiring harness.

3.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to

SR-26, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-56, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B1416
B1417
B1418
B1419
B1420

CONTROL UNIT
(air bag control unit internal trou-
ble)

Air bag diagnosis sensor unit is
malfunctioning

Malfunction in air bag diagnosis
sensor unit

B1421 FRONTAL COLLISION DETECTION

SRC-57

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

B1421 FRONTAL COLLISION DETECTION

DTC Logic

INFOID:0000000009718521

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

YES

>> Refer to

SRC-57, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009718522

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

PERFORM COLLISION DIAGNOSIS

Perform collision diagnosis.Refer to

SR-6, "FOR FRONTAL COLLISION : When SRS is activated in a colli-

sion"

or

SR-8, "FOR SIDE AND ROLLOVER COLLISION : When SRS is activated in a collision"

.

>> GO TO 2.

2.

FINAL INSPECTION

Perform “AIR BAG” Self Diagnostic Result.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Perform diagnosis of applicable DTC. Refer to

SRC-57, "DTC Logic"

.

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B1421

FRONTAL COLLISION DETEC-
TION
(Firing Record, Frontal)

Driver air bag, passenger air bag
and seat belt pre-tensioner are de-
ployed

—

SRC-58

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

B1422 SIDE COLLISION DETECTION

B1422 SIDE COLLISION DETECTION

DTC Logic

INFOID:0000000009718523

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?

YES

>> Refer to

SRC-58, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009718524

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

PERFORM COLLISION DIAGNOSIS

Perform collision diagnosis.Refer to

SR-6, "FOR FRONTAL COLLISION : When SRS is activated in a colli-

sion"

or

SR-8, "FOR SIDE AND ROLLOVER COLLISION : When SRS is activated in a collision"

.

>> GO TO 2.

2.

FINAL INSPECTION

Perform “AIR BAG” Self Diagnostic Result.
Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Perform diagnosis of applicable DTC. Refer to

SRC-58, "DTC Logic"

.

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B1422

SIDE COLLISION DETECTION
(Firing Record, Side)

Side air bag and curtain air bag are
deployed

—

B1423 ROLLOVER DETECTION

SRC-59

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

B1423 ROLLOVER DETECTION

DTC Logic

INFOID:0000000009718525

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

YES

>> Refer to

SRC-59, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009718526

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

PERFORM COLLISION DIAGNOSIS

Perform collision diagnosis.Refer to

SR-6, "FOR FRONTAL COLLISION : When SRS is activated in a colli-

sion"

or

SR-8, "FOR SIDE AND ROLLOVER COLLISION : When SRS is activated in a collision"

.

>> GO TO 2.

2.

FINAL INSPECTION

Perform “AIR BAG” Self Diagnostic Result.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Perform diagnosis of applicable DTC. Refer to

SRC-59, "DTC Logic"

.

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B1423

ROLLOVER DETECTION
(Firing Record, Rollover with Roll-
ing state 2)

Front seat belt pre-tensioner, curtain air
bag module are deployed because of roll-
over detection

—