Nissan Murano. Instruction — part 1391
TM-106
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
SHIFT POSITION INDICATOR CIRCUIT
SHIFT POSITION INDICATOR CIRCUIT
Description
INFOID:0000000009719525
• TCM sends position indicator signals to combination meter via CAN communication line.
• The selector lever position is indicated on the shift position indicator.
Component Function Check
INFOID:0000000009719526
1.
CHECK SHIFT POSITION INDICATOR
CAUTION:
Always drive vehicle at a safe speed.
1.
Start engine.
2.
Check that correct selector lever position (“P”, “R”, “N”, “D”, “L”) is displayed as selector lever is moved
into each position.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000009719527
1.
CHECK INPUT SIGNALS
With CONSULT
1.
Start engine.
2.
Select “RANGE” in “Data Monitor” and read out the value.
3.
Check that correct selector lever position (“P”, “R”, “N”, “D”, “L”) is displayed as selector lever is moved
into each position.
Is the inspection result normal?
YES
>> INSPECTION END
NO-1 (CVT position indicator does not indicate “L” when selector lever is moved into “L”.)>>Check the fol-
lowing.
• Check overdrive control switch. Refer to
.
• Check CVT main system (Fail-safe function actuated).
- Perform “Self Diagnostic Results” in “TRANSMISSION”.
NO-2 (The actual gear position changes, but the shift position indicator is not indicated.)>>Perform
“Self
Diagnostic Results” in “TRANSMISSION”.
NO-3 (The actual gear position and the indication on the shift position indicator do not coincide.)>>Perform
“Self Diagnostic Results” in “TRANSMISSION”.
NO-4 (Only a specific position or positions is/are not indicated on the shift position indicator.)>>Check
the
combination meter. Refer to
SHIFT LOCK SYSTEM
TM-107
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT LOCK SYSTEM
Description
INFOID:0000000009719528
Component
Function
Shift lock solenoid
It operates according to the signal from the stop lamp switch and
moves the lock lever.
Lock lever
It moves according to the operation of the shift lock solenoid and
performs the release of the shift lock.
Detent rod
It links with the selector button and restricts the selector lever
movement.
Park position switch
It detects that the selector lever is in “P” position.
Shift lock release button
It moves the lock lever forcibly.
TM-108
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
SHIFT LOCK SYSTEM
Wiring Diagram - CVT SHIFT LOCK SYSTEM -
INFOID:0000000009719529
JRDWC0476GB
SHIFT LOCK SYSTEM
TM-109
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
JRDWC1702GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст