Nissan Murano. Instruction — part 360
AUTOMATIC BACK DOOR SYSTEM
DLK-51
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Component Description
INFOID:0000000009718908
Item
Function
Automatic back door control unit
Control the automatic back door system
BCM
Transmits and receive signals to the automatic back door control unit
Combination meter
Transmits vehicle speed signal to automatic back door control unit
ABS actuator and electrical
Transmits vehicle speed signal to automatic back door control unit
Automatic back door unit
Automatic back door motor, encoder and clutch are installed
Automatic back door buzzer
Warns the user of the automatic back door condition and inappropriate operations
with the buzzer sounds
Back door lock assembly
Back door closure motor, half latch switch, open switch and close switch are installed
Touch sensor LH/RH
During back door close operation, the touch sensor detects any trapped foreign ma-
terial
Automatic back door close switch
Automatic back door system can be operated from back door area
Automatic back door main switch
Automatic back door system can be active or inactive except automatic back door
switch operation
Automatic back door switch
Automatic back door system can be operated from driver seat area
DLK-52
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Component Parts Location
INFOID:0000000009718909
JMKIA1956ZZ
1.
Fuel lid opener switch M108
2.
Fuel lid opener actuator B58
INTEGRATED HOMELINK TRANSMITTER
DLK-53
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTEGRATED HOMELINK TRANSMITTER
Component Description
INFOID:0000000009718910
Item
Function
Homelink universal transceiver
A maximum of 3 radio signals can be stored and transmitted to operate the garage door, etc.
DLK-54
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000010044856
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×
: Applicable item
NOTE:
• *1: For models with rain sensor this mode is displayed, but is not used.
• *2: This item is displayed, but is not used.
FREEZE FRAME DATA (FFD)
Diagnosis mode
Function Description
Work Support
Changes the setting for each system function.
Self Diagnostic Result
Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from BCM.
Data Monitor
The BCM input/output signals are displayed.
Active Test
The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification
The BCM part number is displayed.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing BCM.
System
Sub system selection item
Diagnosis mode
Work Support
Data Monitor
Active Test
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
*
1
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
×
—
AIR CONDITONER*
2
• Intelligent Key system
• Engine start system
INTELLIGENT KEY
×
×
×
Combination switch
COMB SW
×
Body control system
BCM
×
NVIS - NATS
IMMU
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Back door opener system
TRUNK
×
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
TPMS (AIR PRESSURE MONITOR)
×
×
×
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст