Nissan GT-R. Instruction — part 179
INT-18
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
Note the following, and install in the reverse order of removal.
CAUTION:
When installing body side trim, check that clips are securely fitted in panel holes on the body, and then
press them in.
REAR PARCEL SHELF FINISHER
INT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR PARCEL SHELF FINISHER
Exploded View
INFOID:0000000009162333
Removal and Installation
INFOID:0000000009162334
REMOVAL
1.
Remove the rear seat cushion and the rear seatback. Refer to
SE-56, "Removal and Installation"
2.
Remove the kicking plate inner (LH/RH) and body side welt (LH/RH). Refer to
.
3.
Remove the rear side finisher (LH/RH). Refer to
INT-15, "Removal and Installation"
4.
Remove the rear pillar finisher (LH/RH). Refer to
INT-15, "Removal and Installation"
5.
Remove the rear console assembly. Refer to
IP-23, "Removal and Installation"
1.
Child anchor cover
2.
Rear parcel shelf finisher
3.
Rear seat center finisher
: Clip
: Pawl
JMJIA2166ZZ
INT-20
< REMOVAL AND INSTALLATION >
REAR PARCEL SHELF FINISHER
6.
Remove the rear seat center finisher mounting bolts (B) using
socket wrench (A).
7.
Insert the remover tool (A) into the clearance between the rear
seat center finisher (1) and the vehicle body, and then disen-
gage the clips.
8.
Remove the rear parcel shelf finisher mounting clips (A).
9.
Remove the rear seat belt escutcheon.
10. Remove the rear seat belt inner anchor. Refer to
SB-11, "SEAT BELT RETRACTOR : Removal and Instal-
.
11. Disengage the child anchor cover (1) fixing pawls, with a
remover tool (A) and then remove the child anchor cover (LH/
RH).
NNJIA0106ZZ
: Clip
NNJIA0107ZZ
NNJIA0022ZZ
NNJIA0181ZZ
REAR PARCEL SHELF FINISHER
INT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
12. Remove the rear seat belt (1) through the hole of rear parcel
shelf finisher (2) as shown in the figure.
13. Pull and remove the rear parcel shelf finisher after disengaging the clip from the back side of rear parcel
shelf finisher.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Check that clips are securely fitted in panel holes on body when installing the rear parcel shelf finisher
and then press in.
NNJIA0109ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст