Nissan GT-R. Instruction — part 29
AV
MULTI AV SYSTEM
AV-111
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Driving History Information Display Mode
Displays the sub-functions (driving route history and required time
history) indicating the driving history.
Fail-Safe
INFOID:0000000009163338
When the ambiance temperature becomes extremely low or extremely high, AV control unit displays the mes-
sage and limits the AV control unit function.
FAIL-SAFE CONDITIONS
When the ambiance temperature is
−
20
°
C (
−
4
°
F) or lower, or when it is 70
°
C (158
°
F) or higher
Display
The messages displayed on fail-safe conditions are as shown below:
Display
Display item
Description
Signal route
Display
form
Display
range
Unit
GEAR POSI-
TION
GEAR
Selected gear position
Position sensor
→
TCM
→
Combination meter
→
AV control unit
Value/
symbol
R, P, N, 1 -
6
—
SPEED
Vehicle speed
Wheel sensor
→
ABS
actuator and electric
unit (control unit)
→
AV
control unit
Value
0 - 340
km/h
0 - 215
MPH
GEAR
EFFICIENCY
Displays ECO/power band per
gear.
TCM
→
Combination
meter
→
AV control unit
Special
display
—
—
FUEL ECONO-
MY
FUEL EFFICIENCY
Displays the current ECO level.
ECM/TCM/Combina-
tion meter
→
AV control
unit
Gauge
10 levels
—
FUEL ECON
Interval fuel consumption
(for 1 minuets)
ECM/Combination
meter
→
AV control unit
Value
0 - 30
l/100
km
Graph
0 - 30
Value
0 - 60
MPG
Graph
0 - 30
FUEL EFFICIENCY
Displays the history of an aver-
age ECO level per minute
(20 minutes data)
ECM/TCM/Combina-
tion meter
→
AV control
unit
Graph
10 levels
—
NNNIA0169ZZ
Display
Description
Display form
STOP WATCH
Displays the measured TIME results.
Special display
DRIVER'S NOTES
Displays the driving history information
Special display
Fail-safe mode
Display (display of the fail-safe condition)
When HDD temperature is low
HDD system is experiencing problems due to extreme low temperature.
Normal operation will resume when temperature rises.
When HDD temperature is high
HDD system is experiencing problems due to extreme high temperature.
Normal operation will resume when temperature drops.
AV-112
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM
DESCRIPTION OF CONTROLS
Ability Operation Mode
There is an ability operation mode for Fail-safes due to low or high ambiance temperature.
If HDD data can be read, fail-safe is shown, then normal displays are displayed only for functions which can be
operated.
RELEASE CONDITIONS OF FAIL-SAFE
Fail-safe is released on following conditions and normal mode is restored.
When The Temperature of HDD Is Low or High
If the ambient temperature becomes out of fail-safe condition range, normal mode is restored.
Function
When Fail-safe Function is activated
Air conditioner
Operation
Only multifunction switch (preset switch) can be operated.
Display
• LED of multifunction switch (preset switch) illuminates.
• Aimed temperature, blow angle, and flow rate are displayed in simplified mode.
Audio
Operation
Only ON/OFF and volume control operations by multifunction switch (preset switch) are possible.
Display
No display (“Fail-safe mode” is displayed)
Camera
Operation
Image tone cannot be controlled.
Display
Cannot be superimposed. (warning display, tone control display)
Hands-free phone
Operation
Cannot be operated.
Navigation
Operation
Cannot be operated.
Self diagnosis
The display in simplified mode of fail-safe condition
CONSULT diagnosis
Cannot be operated.
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-113
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Description
INFOID:0000000009163339
• The AV control unit diagnosis function starts up with multifunction switch operation and the AV control unit
performs a diagnosis for each unit in the system during the on board diagnosis.
• Perform a CONSULT diagnosis if the on board diagnosis does not start, e.g., the screen does not display
anything, the multifunction switch does not function, etc.
On Board Diagnosis Function
INFOID:0000000009163340
MULTIFUNCTION SWITCH AND PRESET SWITCH SELF-DIAGNOSIS FUNCTION
The ON/OFF operation (continuity) of each switch in the multifunction switch and preset switch can be
checked.
Self-diagnosis Mode
• Press both the preset switches “1” and “6” simultaneously within 10
seconds after turning the ignition switch from OFF to ACC and hold
them for 3 seconds or more. Then release the switches. The
buzzer sounds, all indicators of the centralized and preset switches
illuminate, and the self-diagnosis mode starts.
• The continuity of each switch at the ON position can be checked
by pressing the switch. The buzzer sounds if the switch is normal.
Finishing Self-diagnosis Mode
Self-diagnosis mode is canceled when turning the ignition switch OFF.
ON BOARD DIAGNOSIS ITEM
Description
• The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and
a confirmation/adjustment mode for operating instructionly.
• The self-diagnosis mode performs diagnoses on the AV control unit, connections between system compo-
nents as well as connections between AV control unit and GPS antenna. Then it displays the diagnosis
results on the display.
• The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and
set values, as well as to monitor the system error records and system communication status. The checking,
modifying or adjusting generally require human intervention and judgment (the system cannot make judg-
ment automatically).
On Board Diagnosis Item
NNNIA0122ZZ
Mode
Description
Self Diagnosis
• AV control unit diagnosis.
• Diagnoses the connections across system components, between AV
control unit and GPS antenna.
AV-114
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
METHOD OF STARTING
1.
Start the engine.
2.
Turn the audio system OFF.
3.
Turn the “VOL” dial either clockwise or counterclockwise for 40
clicks or more while pressing the “SETTING” button. (Beep
sounds when starting the self-diagnosis mode.) Press the
“BACK” switch and the initial system screen will be shown.
Confirmation/
Adjustment
Display Diagnosis
The following check functions are available: color tone check by color
bar display, light and shade check by gray scale display, touch panel cal-
ibration, touch panel response check and color tone check by white dis-
play.
Vehicle Signals
Diagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition, reverse, side view switch and room lamp.
Speaker Test
The connection of a speaker can be confirmed by test tone.
Navigation
Steering Angle Ad-
justment
When there is a difference between the actual turning angle and the ve-
hicle mark turning angle, it can be adjusted.
Speed Calibration
When there is a difference between the current location mark and the ac-
tual location, it can be adjusted.
XM SAT Subscrip-
tion Status
The XM NavTraffic subscription status can be checked.
Error History
The system malfunction and the frequency when occurring in the past
are displayed. When the malfunctioning item is selected, the time and
place that the selected malfunction last occurred are displayed.
Synchronizer FES Clock
–
Vehicle CAN Diagnosis
The transmitting/receiving of CAN communication can be monitored.
AV COMM Diagnosis
The communication condition of each unit of Multi AV system can be
monitored.
Hands-free Phone
The received volume adjustment of hands-free phone, microphone
speaker check, and erase memory can be performed.
Camera Cont.
The four functions of “Correct Draw Line of Rear view Camera”, “Alter/
Confirm Configuration”, “Reset Configuration” and “Camera Syst Type”
are available.
XM
XM Navi Trffic
Change Channel
• Any necessary channels required to receive traffic information from
the satellite radio system can be set.
Change Application ID
• Any application ID'-s required to receive traffic information from the
satellite radio system can be set.
XM NavWeather
XM CGS
Diag
Not used.
Delete Unit Connection Log
Erase the connection history of unit and error history.
Initialize Settings
Initializes the AV control unit memory.
Version Information
Version information of the AV control unit is displayed.
Mode
Description
NNNIA0123ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст