Nissan GT-R. Instruction — part 173
PRECAUTIONS
INL-17
< PRECAUTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
4.
Perform the necessary repair operation.
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the ignition switch from ACC position to ON position, then to LOCK position. (The steering wheel will lock
when the ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT.
Precaution for Battery Service
INFOID:0000000009161931
Before disconnecting the battery, lower both the driver and passenger windows. This will prevent any interfer-
ence between the window edge and the vehicle when the door is opened/closed. During normal operation, the
window slightly raises and lowers automatically to prevent any window to vehicle interference. The automatic
window function will not work with the battery disconnected.
INL-18
< REMOVAL AND INSTALLATION >
MAP LAMP
REMOVAL AND INSTALLATION
MAP LAMP
Exploded View
INFOID:0000000009161932
Removal and Installation
INFOID:0000000009161933
for the map lamp assembly installation/removal.
Replacement
INFOID:0000000009161934
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
MAP LAMP BULB
1.
Insert any appropriate tool into the gap between the lens. Remove the lens.
2.
Remove the bulb.
1.
Map lamp assembly
2.
Bulb
3.
Lens
JPLIA0059ZZ
VANITY MIRROR LAMP
INL-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
VANITY MIRROR LAMP
Exploded View
INFOID:0000000009161935
Replacement
INFOID:0000000009161936
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
VANITY MIRROR LAMP BULB
1.
Insert any appropriate tool into the gap between the lens. Remove the lens.
2.
Remove the bulb.
1.
Lens
2.
Vanity mirror assembly
3.
Bulb
JPLIA0749ZZ
INL-20
< REMOVAL AND INSTALLATION >
GLOVE BOX LAMP
GLOVE BOX LAMP
Exploded View
INFOID:0000000009161937
Replacement
INFOID:0000000009161938
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
GLOVE BOX LAMP BULB
1.
Remove the instrument assist lower panel. Refer to
.
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb.
1.
Bulb
2.
Bulb socket
JPLIA0066ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст