Nissan GT-R. Instruction — part 278
SE-54
< REMOVAL AND INSTALLATION >
FRONT SEAT
2.
Remove the seat cushion outer finisher outside.
3.
Disconnect the connectors of seat control switch, heater switch, and thigh support (driver seat only)
switch.
4.
Remove the seat cushion inner finisher outside.
5.
Remove the seatback trim retainer.
6.
Remove the seatback panel.
• Unfasten the seatback trim fastener.
• Remove the seatback cover panel mounting screws, and then
remove the seatback cover panel.
7.
Disconnect the harness connector.
Driver side
1.
Disconnect the reclining limit switch harness connector (A),
the heater unit harness connectors (B), and the reclining
motor harness connector (C).
: Metal clip
: Pawl
JMJIA2137ZZ
: Metal clip
: Pawl
JMJIA2138ZZ
JMJIA2141ZZ
JMJIA5892ZZ
FRONT SEAT
SE-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
2.
Remove the side air bag harness (D).
Passenger side
1.
Disconnect the reclining motor harness connector (E), the
heater unit harness connectors (F), and the reclining limit
switch harness connector (G).
2.
Remove the side air bag harness (J).
8.
Remove the seatback assembly.
Remove the seatback mounting bolts (A), and then remove the
seatback assembly.
9.
Remove the seat belt buckle. Refer to
SB-8, "SEAT BELT BUCKLE : Removal and Installation"
.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the pad side wire.
NNJIA0137ZZ
JMJIA5592ZZ
NNJIA0146ZZ
JMJIA2153ZZ
SE-56
< REMOVAL AND INSTALLATION >
REAR SEAT
REAR SEAT
Exploded View
INFOID:0000000009162951
Removal and Installation
INFOID:0000000009162952
REMOVAL
CAUTION:
Use shop cloths to protect parts from damage during removal and installation.
1.
Remove the seat cushion.
1.
Seatback (RH)
2.
Seat cushion (RH)
3.
Seatback (LH)
4.
Seat cushion (LH)
Refer to
for symbols in the figure.
NNJIA0138GB
REAR SEAT
SE-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Lift up the seat cushion lower side, disengage the joint by pull-
ing the ring (1) of the cushion hook on the front bottom, and
then lift up the seat cushion (2) to remove the seat cushion.
• Remove the seat cushion from the vehicle.
2.
Remove the seatback.
• Remove the seatback lower mounting nut.
• Remove the seatback from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Use shop cloths to protect parts from damage during removal and installation.
JMJIA0251ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст