Nissan GT-R. Instruction — part 314
VTL-12
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
2.
Remove mounting screws (A), and then remove side defroster
duct RH (1).
INSTALLATION
Installation is basically the reverse order of removal.
FOOT GRILLE
FOOT GRILLE : Removal and Installation
INFOID:0000000009160148
REMOVAL
1.
Remove foot grille LH (1).
2.
Remove foot grille RH (1).
INSTALLATION
Installation is basically the reverse order of removal.
HEATER DUCT
HEATER DUCT : Removal and Installation
INFOID:0000000009160149
REMOVAL
NNIIA0093ZZ
: Pawl
JSIIA1249ZZ
: Pawl
JSIIA1250ZZ
DUCT AND GRILLE
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Remove mounting screw (A), and then remove heater duct (1) from
heater & cooling unit assembly (2).
INSTALLATION
Installation is basically the reverse order of removal.
FOOT DUCT
FOOT DUCT : Removal and Installation
INFOID:0000000009160150
REMOVAL
Driver Side
1.
Remove heater & cooling unit assembly. (This work should be performed by GT-R certified NISSAN
dealer.)
2.
Remove aspirator.
3.
Remove mounting screws (A), and then remove heater pipe
cover (1).
4.
Remove mounting screws (B), and then remove foot duct LH
(2).
Passenger Side
1.
Set the temperature (passenger side) at 18.0
°
C (60
°
F).
2.
Disconnect the battery cable from negative terminal.
CAUTION:
The angle may be out, when installing the air mix door motor to the air mix door, unless the above
2 procedures are performed.
3.
Remove heater & cooling unit assembly. (This work should be performed by GT-R certified NISSAN
dealer.)
4.
Remove air mix door motor (passenger side). Refer to
5.
Remove mode door motor and links. Refer to
6.
Remove mounting screws (A), and then remove evaporator
cover (1).
7.
Remove mounting screws (B), and then remove foot duct RH
(2).
: Vehicle front
JSIIA1177ZZ
JSIIA1178ZZ
JSIIA1179ZZ
VTL-14
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
INSTALLATION
Installation is basically the reverse order of removal.
BLOWER UNIT
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
BLOWER UNIT
Exploded View
INFOID:0000000009160151
REMOVAL
DISASSEMBLY
1.
Blower unit
2.
Heater & cooling unit assembly
3.
Steering member
4.
Instrument panel assembly
for symbols in the figure.
NNIIA0138GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст