Nissan GT-R. Instruction — part 215
MWI
METER SYSTEM
MWI-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ODO/TRIP METER : Component Parts Location
INFOID:0000000009189312
1.
Fuel level sensor unit
(Sub)
2.
Fuel level sensor unit
(Main)
3.
Door switch (passenger side)
4.
Oil pressure sensor
5.
Ambient sensor
6.
Oil level sensor
7.
Washer level switch
8.
AWD control unit
9.
Brake fluid level switch
JPNIA1142ZZ
MWI-20
< SYSTEM DESCRIPTION >
METER SYSTEM
ODO/TRIP METER : Component Description
INFOID:0000000009189313
SHIFT POSITION INDICATOR
SHIFT POSITION INDICATOR : System Diagram
INFOID:0000000009189314
SHIFT POSITION INDICATOR : System Description
INFOID:0000000009189315
• The combination meter receives the shift position signal from TCM via CAN communication, and displays
the shift position to the shift position indicator.
• The combination meter receives the shift position signal from TCM via CAN communication. If the status
does not allow a shift change, it blinks the shift position indicator.
10. ABS actuator and electric unit (con-
trol unit)
11. Door switch (driver side)
12. TCM
13. Trunk switch
14. Combination meter
15. Combination switch (Lighting switch)
16. Low tire pressure warning control unit 17. Parking brake
18. BCM
19. ECM
A.
Under rear seat
B.
Right side of engine
C.
Radiator core support (center)
D.
Oil pan LH upper
E.
Front RH seat under
F.
Trunk room left back
G.
Lower instrument panel LH
H.
Dashboard side lower (passenger
seat side)
I.
Glove box assembly back
Unit
Description
Combination meter
Converts the vehicle speed signal received from the ABS actuator and electric unit (control unit)
via CAN communication to mileage, and displays the accumulated mileage to the odometer and
tripmeter.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
JPNIA1146GB
MWI
METER SYSTEM
MWI-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SHIFT POSITION INDICATOR : Component Parts Location
INFOID:0000000009189316
1.
Fuel level sensor unit
(Sub)
2.
Fuel level sensor unit
(Main)
3.
Door switch (passenger side)
4.
Oil pressure sensor
5.
Ambient sensor
6.
Oil level sensor
7.
Washer level switch
8.
AWD control unit
9.
Brake fluid level switch
JPNIA1142ZZ
MWI-22
< SYSTEM DESCRIPTION >
METER SYSTEM
SHIFT POSITION INDICATOR : Component Description
INFOID:0000000009189317
OIL PRESSURE WARNING LAMP
OIL PRESSURE WARNING LAMP : System Diagram
INFOID:0000000009189318
OIL PRESSURE WARNING LAMP : System Description
INFOID:0000000009189319
OIL PRESSURE WARNING LAMP
Control Outline
The combination meter reads the oil pressure sensor signal from oil pressure sensor, and illuminates/turns off
the oil pressure warning lamp.
NOTE:
The display of engine oil pressure warning on the information display is shown/turned off simultaneously with
the illumination/turning off of the oil pressure warning lamp.
10. ABS actuator and electric unit (con-
trol unit)
11. Door switch (driver side)
12. TCM
13. Trunk switch
14. Combination meter
15. Combination switch (Lighting switch)
16. Low tire pressure warning control unit 17. Parking brake
18. BCM
19. ECM
A.
Under rear seat
B.
Right side of engine
C.
Radiator core support (center)
D.
Oil pan LH upper
E.
Front RH seat under
F.
Trunk room left back
G.
Lower instrument panel LH
H.
Dashboard side lower (passenger
seat side)
I.
Glove box assembly back
Unit
Description
Combination meter
• Receives the shift position signal from TCM via CAN communication, and displays the shift po-
sition to the shift position indicator.
• Receives the shift position signal from TCM via CAN communication, and if the status does not
allow a shift change, it blinks the shift position display in the shift position indicator.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
JPNIA1144GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст