Nissan GT-R. Instruction — part 36
AV
BOSE AUDIO AND NAVIGATION SYSTEM
AV-139
< WIRING DIAGRAM >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
JRNWC1441GB
AV-140
< WIRING DIAGRAM >
[BOSE AUDIO WITH NAVIGATION]
BOSE AUDIO AND NAVIGATION SYSTEM
JRNWC1442GB
AV
INSPECTION AND ADJUSTMENT
AV-141
< BASIC INSPECTION >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000009163349
BEFORE REPLACEMENT
When replacing AV control unit, save or print current vehicle specification with CONSULT configuration before
replacement.
AFTER REPLACEMENT
CAUTION:
When replacing AV control unit, you must perform “After Replace ECU” or “Instruction Configuration”
with CONSULT.
• Complete the procedure of “After Replace ECU” or “Instruction Configuration” in order.
• If you set incorrect “After Replace ECU” or “Manual Configuration”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement
INFOID:0000000009163350
1.
SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform “Before Replace ECU” to save or print current vehicle specification. Refer to
TION (AV CONTROL UNIT) : Description"
NOTE:
If “Before Replace ECU” can not be used, use the “Instruction Configuration”.
>> GO TO 2.
2.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to
AV-168, "Removal and Installation"
>> GO TO 3.
3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform “After Replace ECU” or “Instruction Configuration” to write vehicle specification. Refer to
FIGURATION (AV CONTROL UNIT) : Special Repair Requirement"
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT) : Description
INFOID:0000000009163351
• Since vehicle specifications are not included in the AV control unit after replacement, it is required to write
vehicle specifications with CONSULT.
• The AV control unit configuration includes functions as follows.
AV-142
< BASIC INSPECTION >
[BOSE AUDIO WITH NAVIGATION]
INSPECTION AND ADJUSTMENT
CONFIGURATION (AV CONTROL UNIT) : Special Repair Requirement
INFOID:0000000009163352
1.
WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit>>GO TO 2.
To write vehicle specification into the AV control unit by hand>>GO TO 3.
2.
WRITE STORED DATA
CONSULT Configuration
Select “After Replace ECU” in “Read/Write Configuration”. Write data stored in CONSULT with the “Before
Replace ECU” function into the AV control unit.
>> GO TO 4.
3.
MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Perform “Instruction Configuration”. Refer to
AV-142, "CONFIGURATION (AV CONTROL UNIT) : Configuration
.
NOTE:
If selection items are not displayed on the CONSULT screen, touch “NEXT”.
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
CONFIGURATION (AV CONTROL UNIT) : Configuration List
INFOID:0000000009163353
CAUTION:
Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifica-
tions are misread.
NOTE:
• The items shown in this list depend on vehicle specifications.
• The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
Function
Description
Read/Write Configuration
Before Replace ECU
Allows the reading of vehicle specification written in AV control unit
to store the specification in CONSULT.
After Replace ECU
Allows the writing of the vehicle information stored in CONSULT
into the AV control unit.
Instruction Configuration
Allows the writing of the vehicle specification into the AV control
unit by hand.
MANUAL SETTING ITEM
Note
Items
Setting value
STEERING
LHD
—
RHD
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст