Nissan Titan. Instruction — part 446
IP-10
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
REMOVAL AND INSTALLATION
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000009881984
AWJIA0658ZZ
INSTRUMENT PANEL ASSEMBLY
IP-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009881985
REMOVAL
CAUTION:
Disconnect both the negative and positive battery terminals, then wait at least three minutes.
1. Disconnect the negative and positive battery terminals, then wait at least three minutes.
2. Remove the A/T finisher. Refer to
IP-18, "Removal and Installation"
3. Remove the front center console assembly upper screws.
4. Remove instrument lower panel RH and glove box assembly. Refer to
IP-16, "Removal and Installation"
.
5. Remove center console lower cover RH/LH, then remove front center console assembly lower screws.
6. Open the console lid assembly and remove console bin mat, then remove the rear inner screws.
7. Move front seats forward.
8. Remove lower center console assembly screws at the rear.
9. Move the center console assembly rearward slightly to create additional clearance when removing the
instrument panel and pad assembly.
10. Remove the spiral cable. Refer to
SR-6, "Removal and Installation"
11. Remove the combination meter. Refer to
MWI-93, "Removal and Installation"
12. Release instrument panel upper cover clips and remove instrument panel upper cover.
13. Disconnect rear sonar speaker harness connector (if equipped).
14. Remove cluster lid C. Refer to
IP-14, "Removal and Installation"
15. Remove display unit (if equipped). Refer to
AV-342, "Removal and Installation"
16. Release the defroster grille clips and pawls, disconnect the optical sensor harness connector and remove
defroster grille.
17. Remove side ventilator assembly bolts and side ventilator assemblies (RH/LH).
18. Remove the front pillar finishers (RH/LH). Refer to
INT-14, "Removal and Installation"
.
19. Disconnect the speaker harness connectors (RH/LH/center) through the openings of removed compo-
nents.
20. Remove the passenger air bag nuts and disconnect the connectors. Refer to
.
21. Disconnect remaining optional equipment harness connectors (if equipped).
22. Remove instrument panel and pad assembly.
1.
Defroster grille
2.
Speaker grille RH/LH
3.
Instrument panel and pad assembly
4.
Deck pocket mat RH/LH
5.
Side ventilator assembly RH/LH
6.
Instrument panel upper cover
7.
Combination meter
8.
Switch assembly
9.
Cluster lid A
10. Lower knee protector
11.
Instrument lower panel LH
12. Steering column upper cover
13. Steering column lower cover
14.
Cluster lid D
15. Cluster lid C
16. Instrument lower cover RH
17.
Glove box
18. Ignition switch escutcheon
19. Audio unit
20.
Audio bracket RH/LH
21. Center ventilator assembly RH/LH
22. Display assembly (if equipped)
23.
Glove box lid striker
24. Fuse block cover
25. Instrument lower panel RH
26.
Glove box damper (if equipped)
27. Steering member
ALJIA0084ZZ
IP-12
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
INSTALLATION
Installation is in the reverse order of removal.
CLUSTER LID A
IP-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID A
Exploded View
INFOID:0000000009881986
Removal and Installation
INFOID:0000000009881987
REMOVAL
1. Remove the instrument lower panel LH. Refer to
IP-17, "Removal and Installation"
.
2. Tilt the steering wheel to the lowest position, then remove steering column upper cover.
3. Remove ignition switch escutcheon.
4. Pull cluster lid A rearward in vehicle to release the clips.
5. Disconnect the harness connector(s), then remove cluster lid A.
INSTALLATION
Installation is in the reverse order of removal.
1.
Cluster lid A
2.
Ignition switch escutcheon
Metal Clip
AWJIA0374ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст