Nissan Titan. Instruction — part 373
EXPANSION VALVE
HA-43
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
EXPANSION VALVE
Removal and Installation
INFOID:0000000009882429
REMOVAL
1. Discharge the refrigerant. Refer to
HA-20, "HFC-134a (R-134a) Service Procedure"
.
2. Remove the nuts (A) from the low-pressure pipe (1).
3. Remove the high-pressure pipe and low-pressure pipe bolt (A)
from the expansion valve (1).
CAUTION:
Cap or wrap the A/C refrigerant pipe ends and evaporator
pipe ends with a suitable material such as vinyl tape to
avoid the entry of air.
4. Remove the expansion valve bolts (A), then remove the expan-
sion valve (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply A/C oil to the O-rings on the A/C refrigerant pipes with new ones for installation.
• After charging refrigerant, check for leaks.
ALIIA0595ZZ
ALIIA0596ZZ
ALIIA0633ZZ
Expansion valve bolts
: 4 N·m (0.41 kg-m, 35 in-lb)
A/C refrigerant pipe to expansion valve bolt
: Refer to
HA-44
< REMOVAL AND INSTALLATION >
LIQUID TANK
LIQUID TANK
Removal and Installation
INFOID:0000000009882430
REMOVAL
1. Remove the condenser. Refer to
HA-41, "Removal and Installation"
.
2. Clean liquid tank and its surrounding area and remove dirt and rust from liquid tank.
CAUTION:
Be sure to clean carefully.
3. Remove bracket bolt (A) and liquid tank bolt (B) from liquid tank
(1) at the condenser block.
4. Remove liquid tank bracket (1) from protruding part of con-
denser (2).
5. Slide liquid tank (3) upward away from condenser block and
remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Be careful to align the threaded liquid tank bolt hole (A) with con-
denser block hole (B).
CAUTION:
• Make sure liquid tank bolt is securely installed at condenser
block (B).
• Do not reuse O-rings.
• Apply A/C oil to new O-rings for A/C piping and liquid tank for
installation.
• When recharging refrigerant, check for leaks. Refer to
"Checking System for Leaks Using the Fluorescent Dye Leak
.
ALIIA0403ZZ
ALIIA0404ZZ
ALIIA0405ZZ
AMBIENT SENSOR
HA-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
AMBIENT SENSOR
Removal and Installation
INFOID:0000000009882431
REMOVAL
1. Disconnect the harness connector from ambient sensor.
NOTE:
• The ambient sensor (1) is located behind the front bumper, in
front of the condenser (front grille removed for clarity).
• Access to the ambient sensor is through the opening in the
front bumper.
2. Release the ambient sensor clip, then remove the ambient sen-
sor (1).
INSTALLATION
Installation is in the reverse order of removal.
AWIIA1074ZZ
HA-46
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Service Data and Specification (SDS)
INFOID:0000000009882432
COMPRESSOR
OIL
REFRIGERANT
Make
ZEXEL VALEO CLIMATE CONTROL
Model
DKS-17D
Type
Swash plate
Displacement
175.5 cm
3
(10.7 in
3
) / revolution
Cylinder bore
× stroke
30.5 x 24.0 mm (1.20 x 0.94 in)
Direction of rotation
Clockwise (viewed from drive end)
Drive belt
Poly V
Name
NISSAN A/C System Oil Type S (DH-PS)
Capacity
200 m (6.8 US fl oz, 7.0 Imp fl oz)
Type
HFC 134a (R-134a)
Capacity
0.70
± 0.05 kg (1.54 ± 0.11 lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст