Nissan Pathfinder (2009 year). Instruction — part 539
PG
HARNESS CONNECTOR
PG-69
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
Always confirm the lever is fully released (loosened) before attempting to disconnect or connect these
connectors to avoid damage to the connector housing or terminals.
HARNESS CONNECTOR (DIRECT-CONNECT SRS COMPONENT TYPE)
• SRS direct-connect type harness connectors are used on certain SRS components such as air bag modules
and seat belt pre-tensioners.
• Always pull up to release black locking tab prior to removing connector from SRS component.
• Always push down to lock black locking tab after installing connector to SRS component. When locked, the
black locking tab is level with the connector housing.
CAUTION:
• Do not pull the harness or wires when removing connectors
from SRS components.
LKIA0670E
1.
Control unit with single lever
A. Fasten
B. Loosen
C. Lever
2.
Control unit with dual levers
A. Levers
B. Fasten
C. Loosen
3.
SMJ connector
A. Lever
B. Fasten
C. Loosen
WHIA0103E
2009 Pathfinder
PG-70
< COMPONENT DIAGNOSIS >
STANDARDIZED RELAY
STANDARDIZED RELAY
Description
INFOID:0000000003935683
NORMAL OPEN, NORMAL CLOSED AND MIXED TYPE RELAYS
Relays can mainly be divided into three types: normal open, normal closed and mixed type relays.
TYPE OF STANDARDIZED RELAYS
SEL881H
SEL882H
1M
1 Make
2M
2 Make
1T
1 Transfer
1M·1B
1 Make 1 Break
2009 Pathfinder
PG
STANDARDIZED RELAY
PG-71
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
WKIA0253E
2009 Pathfinder
PG-72
< COMPONENT DIAGNOSIS >
FUSE BLOCK-JUNCTION BOX (J/B)
FUSE BLOCK-JUNCTION BOX (J/B)
Terminal Arrangement
INFOID:0000000003935685
ABMIA0312GB
2009 Pathfinder
PG
FUSE AND FUSIBLE LINK BOX
PG-73
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
FUSE AND FUSIBLE LINK BOX
Terminal Arrangement
INFOID:0000000003935686
ABMIA0313GB
2009 Pathfinder
PG-74
< COMPONENT DIAGNOSIS >
FUSE AND RELAY BOX
FUSE AND RELAY BOX
Terminal Arrangement
INFOID:0000000003935687
ABMIA0314GB
2009 Pathfinder
PG
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
PG-75
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE
ROOM)
Fuse, Connector and Terminal Arrangement
INFOID:0000000004336254
WKIA5856E
2009 Pathfinder
PG-76
< ON-VEHICLE REPAIR >
BATTERY
ON-VEHICLE REPAIR
BATTERY
Removal and Installation
INFOID:0000000003935688
REMOVAL
1.
Disconnect both negative and positive battery terminals.
CAUTION:
Disconnect negative battery terminal first.
2.
Remove battery clamp nuts and battery clamp.
3.
Remove battery.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When connecting battery terminals, connect positive battery terminal first.
Reset electronic systems as necessary. Refer to
PG-7, "Special Repair Requirement"
.
WKIA3188E
Battery clamp nuts
: 3.92 N·m (0.40 kg-m, 35 in-lb)
Battery terminal nut
: 3.4 N·m (0.35 kg-m, 30 in-lb)
2009 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст