Nissan Qashqai (2007-2010). Manual — part 850
MODE DOOR
VTL-65
< ON-VEHICLE MAINTENANCE >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
ON-VEHICLE MAINTENANCE
MODE DOOR
Exploded View
INFOID:0000000001117098
Adjustment
INFOID:0000000001098000
1.
Intake connector seal
2.
Blower motor assembly
3.
Heater pipe seal
4.
Air conditioner filter
5.
Air conditioner filter cover
6.
Air mix door motor (left)
7.
Air mix door lever
8.
Electrical heater
9.
Air mix door (slide door)
10.
Intake sensor
11.
Evaporator and expansion valve unit
12. Center case (lower)
13.
Center case (upper)
14.
Defroster door
15. Intake door motor
16.
Intake motor bracket
17.
Intake connector
18. Heater core
19.
Air mix door link bracket
20.
Front ventilator door
21. Side ventilator door
22.
Intake door lever
23.
Intake door box
24. Intake door
25.
Mode door motor
26.
Air mix door link (left)
27. Heater and cooling unit case
28.
Air mix door motor (right)
29.
Aspirator
30. Air mix door link (right)
*
With left and right ventilation temperature separately system.
Refer to
for symbols in the figure.
E1IIA0008GB
VTL-66
< ON-VEHICLE MAINTENANCE >
[MANUAL AIR CONDITIONER]
MODE DOOR
1.
Remove the instrument lower panel. Refer to
2.
Remove the outer cable of mode door cable from the clamp.
3.
Set mode dial to “ventilation” position.
4.
Push the main link in the direction shown by the arrow, then
carefully pull outer cable to the controller side, and install the
clamp.
5.
Operate the mode dial to insure that the inner cable moves
smoothly.
CAUTION:
When clamping the outer cable, de not move the inner
cable.
E1IIA0035ZZ
E1IIA0033ZZ
AIR MIX DOOR
VTL-67
< ON-VEHICLE MAINTENANCE >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
AIR MIX DOOR
Exploded View
INFOID:0000000001117099
Adjustment
INFOID:0000000001093852
1.
Intake connector seal
2.
Blower motor assembly
3.
Heater pipe seal
4.
Air conditioner filter
5.
Air conditioner filter cover
6.
Air mix door motor (left)
7.
Air mix door lever
8.
Electrical heater
9.
Air mix door (slide door)
10.
Intake sensor
11.
Evaporator and expansion valve unit
12. Center case (lower)
13.
Center case (upper)
14.
Defroster door
15. Intake door motor
16.
Intake motor bracket
17.
Intake connector
18. Heater core
19.
Air mix door link bracket
20.
Front ventilator door
21. Side ventilator door
22.
Intake door lever
23.
Intake door box
24. Intake door
25.
Mode door motor
26.
Air mix door link (left)
27. Heater and cooling unit case
28.
Air mix door motor (right)
29.
Aspirator
30. Air mix door link (right)
*
With left and right ventilation temperature separately system.
Refer to
for symbols in the figure.
E1IIA0008GB
VTL-68
< ON-VEHICLE MAINTENANCE >
[MANUAL AIR CONDITIONER]
AIR MIX DOOR
1.
Remove the instrument panel stay cover. Refer to
2.
Remove the outer cable of air mix door cable from the clamp.
3.
Set temperature control dial to “full cold” position.
4.
Push the air mix door lever in the direction shown by arrow and
then carefully pull the outer cable toward controller side, and
install the clamp.
5.
Operate the temperature control dial to insure than the inner
cable moves smoothly.
CAUTION:
When clamping the outer cable, do not move the inner
cable.
E1IIA0035ZZ
E1IIA0033ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст