Nissan Qashqai (2007-2010). Manual — part 1904
MWI-34
< COMPONENT DIAGNOSIS >
OIL LEVEL SENSOR SIGNAL CIRCUIT
OIL LEVEL SENSOR SIGNAL CIRCUIT
Description
INFOID:0000000000892331
Transmits the oil level sensor signal to the combination meter.
Diagnosis Procedure
INFOID:0000000000892332
HR16DE ENGINE MODELS
1.
CHECK OIL LEVEL SENSOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect combination meter connector and oil level sensor unit connector.
3.
Check continuity between combination meter harness connector terminal 32, 33 and oil level sensor unit
harness connector terminal 1, 3.
4.
Check continuity between combination meter harness connector terminal 32 and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair harness or connector.
EXCEPT HR16DE ENGINE MODELS
1.
CHECK OIL LEVEL SENSOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect combination meter connector and oil level sensor unit connector.
3.
Check continuity between combination meter harness connector terminal 32, 33 and oil level sensor unit
harness connector terminal 1, 2.
4.
Check continuity between combination meter harness connector terminal 32 and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair harness or connector.
Component Inspection
INFOID:0000000000892333
HR16DE ENGINE MODELS
1.
CHECK OIL LEVEL SENSOR UNIT
1.
Turn ignition switch OFF.
2.
Disconnect oil level sensor connector.
3.
Check resistance between oil level sensor terminals 1 and 3.
Is inspection result OK?
YES
>> INSPECTION END
NO
>> Replace oil level sensor.
EXCEPT HR16DE ENGINE MODELS
32 – 1
: Continuity should exist.
33 – 3
: Continuity should exist.
32 – Ground
: Continuity should not exist.
32 – 1
: Continuity should exist.
33 – 2
: Continuity should exist.
32 – Ground
: Continuity should not exist.
1 – 3
: 3 – 20
Ω
MWI
OIL LEVEL SENSOR SIGNAL CIRCUIT
MWI-35
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
1.
CHECK OIL LEVEL SENSOR UNIT
1.
Turn ignition switch OFF.
2.
Disconnect oil level sensor connector.
3.
Check resistance between oil level sensor terminals 1 and 2.
Is inspection result OK?
YES
>> INSPECTION END
NO
>> Replace oil level sensor.
1 – 2
: 3 – 20
Ω
MWI-36
< COMPONENT DIAGNOSIS >
OIL PRESSURE SWITCH SIGNAL CIRCUIT
OIL PRESSURE SWITCH SIGNAL CIRCUIT
Description
INFOID:0000000000892334
Detects the engine oil pressure and transmits the oil pressure switch signal to IPDM E/R.
Component Function Check
INFOID:0000000000892335
1.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “METER/M&A” and check the “OIL W/L” monitor value.
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000000892336
1.
CHECK OIL PRESSURE SWITCH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector and oil pressure switch connector.
3.
Check continuity between IPDM E/R harness connector terminal 27 and oil pressure switch harness con-
nector terminal 1.
4.
Check continuity between IPDM E/R harness connector terminal 27 and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair harness or connector.
Component Inspection
INFOID:0000000000892337
1.
CHECK OIL PRESSURE SWITCH UNIT
Check continuity between oil pressure switch and ground
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace the oil pressure switch.
OIL W/L
Ignition switch ON
: On
Engine running
: Off
27 – 1
: Continuity should exist.
27 – Ground
: Continuity should not exist.
Condition
Oil pressure kPa (bar, kg/cm
2
, psi)
Continuity
Engine stopped
Less than 29 (0.3, 0.3, 4)
Yes
Engine running
More than 29 (0.3, 0.3, 4)
No
ELF0044D
MWI
OAT SENSOR SIGNAL CIRCUIT
MWI-37
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
OAT SENSOR SIGNAL CIRCUIT
Description
INFOID:0000000001078082
The OAT sensor is attached on the radiator core support (left side). It detects ambient temperature and con-
verts it into a resistance value which is then input into the combination meter.
Diagnosis Procedure
INFOID:0000000001078083
1.
CHECK OAT SENSOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect combination meter connector and OAT sensor connector.
3.
Check continuity between combination meter harness connector terminal 20 and oil level sensor harness
connector terminal 1.
4.
Check continuity between combination meter harness connector terminal 20 and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK OAT SENSOR GROUND CIRCUIT
1.
Check continuity between combination meter harness connector terminal 19 and OAT sensor harness
connector terminal 2.
2.
Check continuity between combination meter harness connector terminal 19 and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair harness or connector.
Component Inspection
INFOID:0000000001078084
HAC-78, "Component Inspection"
.
20 – 1
: Continuity should exist.
20 – Ground
: Continuity should not exist.
19 – 2
: Continuity should exist.
19 – Ground
: Continuity should not exist.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст