Nissan Qashqai (2007-2010). Manual — part 1130
DOOR LOCK ACTUATOR
DLK-599
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK ACTUATOR
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000001099028
Locks/unlocks the door with the signal from BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000001099029
1.
CHECK FUNCTION
With CONSULT-III
Check “DOOR LOCK” in Active test mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-599, "DRIVER SIDE : Diagnosis Procedure"
.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000001099030
1.
CHECK OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM and front door lock actuator (driver side) connector.
3.
Check continuity between BCM connector and front door lock actuator (driver side) connector.
4.
Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace harness.
Test item
Condition
DOOR LOCK
ALL LOCK
The all door lock actuator are locked
ALL UNLOCK
The all door lock actuator are unlocked
DR UNLOCK
The door lock actuator (driver side) is unlocked
Terminals
Condition of door lock
and unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM connector
Terminal
M67
56
Ground
Lock
0
→
Battery voltage
→
0
60
Unlock
0
→
Battery voltage
→
0
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M67
56
D9
3
Exists
60
2
BCM connector
Terminal
Ground
Continuity
M67
56
Does not exist
60
DLK-600
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
DOOR LOCK ACTUATOR
3.
CHECK DOOR LOCK ACTUATOR
Check door lock actuator.
Refer to
DLK-600, "DRIVER SIDE : Component Inspection"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace door lock actuator. Refer to
DLK-255, "DOOR LOCK : Exploded View"
"DOOR LOCK : Removal and Installation"
SWITCH : Special Repair Requirement"
DRIVER SIDE : Component Inspection
INFOID:0000000001099031
1.
CHECK FRONT DOOR LOCK ACTUATOR (DRIVER SIDE)
Check the actuator operation by connecting the battery voltage to front door lock actuator (driver side).
Is the inspection result normal?
YES
>> Front door lock actuator (driver side) is OK.
NO
>> Replace front door lock actuator (driver side). Refer to
DLK-255, "DOOR LOCK : Removal and
. After that,
PWC-15, "POWER WINDOW MAIN SWITCH : Special Repair Require-
DRIVER SIDE : Special Repair Requirement
INFOID:0000000001099032
PWC-15, "POWER WINDOW MAIN SWITCH : Special Repair Requirement"
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000001099033
Locks/unlocks the door with the signal from BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000001099034
1.
CHECK FUNCTION
With CONSULT-III
Check “DOOR LOCK” in Active test mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-600, "PASSENGER SIDE : Diagnosis Procedure"
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000001099035
1.
CHECK BCM OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Front door lock actuator (driver side)
Terminal
Door lock actuator condition
(+)
(-)
D9
3
2
LOCK
2
3
UNLOCK
Test item
Condition
DOOR LOCK
:ALL LOCK
The all door lock actuator are locked
:ALL UNLOCK
The all door lock actuator are unlocked
:OTHER UNLOCK
The door lock actuator (front passenger side, rear LH and rear RH) are unlocked
DOOR LOCK ACTUATOR
DLK-601
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM and front door lock actuator (passenger side) connector.
3.
Check continuity between BCM connector and front door lock actuator (passenger side) connector.
4.
Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace harness.
3.
CHECK DOOR LOCK ACTUATOR
Check door lock actuator.
Refer to
DLK-601, "PASSENGER SIDE : Component Inspection"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace door lock actuator. Refer to
DLK-255, "DOOR LOCK : Exploded View"
"DOOR LOCK : Removal and Installation"
.
PASSENGER SIDE : Component Inspection
INFOID:0000000001099036
1.
CHECK FRONT DOOR LOCK ACTUATOR (PASSENGER SIDE)
Check the actuator operation by connecting the battery voltage directly to front door lock actuator (passenger
side).
Is the inspection result normal?
YES
>> Front door lock actuator (passenger side) is OK.
NO
>> Replace front door lock actuator (passenger side). Refer to
DLK-601, "PASSENGER SIDE : Com-
REAR LH
REAR LH : Description
INFOID:0000000001099037
Terminals
Condition of door lock
and unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM connector
Terminal
M67
56
Ground
Lock
0
→
Battery voltage
→
0
54
Unlock
0
→
Battery voltage
→
0
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M67
56
D48
3
Exists
54
2
BCM connector
Terminal
Ground
Continuity
M67
56
Does not exist
54
Front door lock actuator
(passenger side) connector
Terminal
Door lock actuator condition
(+)
(-)
D48
3
2
LOCK
2
3
UNLOCK
DLK-602
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
DOOR LOCK ACTUATOR
Locks/unlocks the door with the signal from BCM.
REAR LH : Component Function Check
INFOID:0000000001099038
1.
CHECK FUNCTION
With CONSULT-III
Check “DOOR LOCK” in Active test mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-602, "REAR LH : Diagnosis Procedure"
.
REAR LH : Diagnosis Procedure
INFOID:0000000001099039
1.
CHECK OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM and rear door lock actuator (LH) connector.
3.
Check continuity between BCM connector and rear door lock actuator (LH) connector.
4.
Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace harness.
3.
CHECK DOOR LOCK ACTUATOR
Check door lock actuator.
Refer to
DLK-603, "REAR LH : Component Inspection"
Is the inspection result normal?
Test item
Condition
DOOR LOCK
:ALL LOCK
The all door lock actuator are locked
:ALL UNLOCK
The all door lock actuator are unlocked
:OTHER UNLOCK
The door lock actuator (front passenger side, rear LH and rear RH) are unlocked
Terminals
Condition of door lock
and unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM connector
Terminal
M67
56
Ground
Lock
0
→
Battery voltage
→
0
54
Unlock
0
→
Battery voltage
→
0
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M67
56
D85
3
Exists
54
2
BCM connector
Terminal
Ground
Continuity
M67
56
Does not exist
54
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст