Nissan Qashqai (2007-2010). Manual — part 1059
BACK DOOR OPENER FUNCTION
DLK-315
< FUNCTION DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Item
Function
BCM
Controls the back door opener function.
Back door opener switch
Transmits back door opener switch operation signal to BCM.
Back door opener actuator
Opens the back door with the back door open signal from BCM.
Combination meter
Transmits vehicle speed signal to BCM via CAN communication.
DLK-316
< FUNCTION DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
WARNING FUNCTION
WARNING FUNCTION
System Diagram
INFOID:0000000001081255
INTELLIGENT KEY WARNING OPERATION
BACK DOOR OPEN WARNING OPERATION
System Description
INFOID:0000000001081256
DESCRIPTION
The warning functions are as follows and are given to the user as warning information and warnings using
combinations of Intelligent Key warning buzzer, key warning lamps and buzzer (built in combination meter).
INTELLIGENT KEY WARNING OPERATION
Once one of the following conditions below is established, alert or warning will be executed.
JMKIA0409GB
JMKIA0410GB
WARNING FUNCTION
DLK-317
< FUNCTION DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Warning/Information functions
Operation conditions
Warning lamp
Warning chime
Combination
meter buzzer
Intelligent Key
warning buzz-
er
Ignition knob return forgotten
warning
When all the conditions below are met.
• Ignition knob: OFF or LOCK (knob is
pressed).
• Door switch (driver side): ON (Door is
open).
—
Active
for 5 seconds
(pipipipi,
pipipipi···)
—
Ignition key warning
(when mechanical key is used)
When all the conditions below are met.
• Ignition switch: OFF position.
• Key switch: ON (inserted)
• Door switch (driver side): ON (Door is
open).
—
Active
for 5 seconds
(pipipipi,
pipipipi···)
—
OFF position warning
When all the conditions below are met.
• Ignition switch is between ACC and
OFF position or ignition knob is
pressed in while ignition switch is in
LOCK position.
• 3 seconds in the above state have
pressed.
“LOCK”
(RED blinking)
Active
for 1 second
(pipi, pipi···)
—
Take away
warning
Any door
open to all
doors closed
When all the conditions below are met.
• Ignition switch: Except LOCK position.
• Door switch: ON to OFF (Door is open
to closed).
• Intelligent Key cannot be detected in-
side the vehicle.
“LOCK”
(RED blinking)
—
Active
(pi, pi, pi)
Door is open
When all the conditions below are met.
• Door switch: ON (Door is open)
• Key ID verification every 5 seconds
when registered Intelligent Key can
not be detected inside the vehicle.
“LOCK”
(RED blinking)
—
—
Take away
through win-
dow
When all the conditions below are met.
• Key ID verification: OK
• Every 30 seconds when registered In-
telligent Key cannot be detected in-
side the vehicle or result of vehicle
speed verification is NG. (The regis-
tered Intelligent Key cannot be detect-
ed inside the vehicle when ignition
switch is ON.)
• Key switch: OFF (Key is removed
from ignition key cylinder.)
“LOCK”
(RED blinking)
Active for 3 sec-
onds
(pipipi···
—
DLK-318
< FUNCTION DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
WARNING FUNCTION
KEY WARNING LAMP & LOCK WARNING LAMP
The key indicator and lock indicator indicates Intelligent Key system status.
Operation Condition
BACK DOOR OPEN WARNING OPERATION
When back door opener switch is operated, when door lock is locked with door lock and unlock switch, speed
sensing lock or only driver side is unlocked with anti-hijack function, the buzzer (built in combination meter) will
sound.
KEY REMINDER OPERATION
• The buzzer (combination meter) will sound and the doors will not lock if the door lock and unlock switch is
pressed while the driver door is open and mechanical key is inserted ignition key cylinder.
• The buzzer (combination meter) will sound and the doors will not lock if the door lock and unlock switch is
pressed while any door other than the driver door is open.
Component Parts Location
INFOID:0000000001117080
Door lock op-
eration warn-
ing
Request
switch opera-
tion
When request switch is pushed (lock op-
eration) under the following conditions.
• Door switch: ON (Any door is open).
• Ignition switch is in ACC or OFF posi-
tion or ignition knob is pressed in
LOCK position or mechanical key is
inserted into ignition key cylinder.
• Intelligent Key is inside vehicle.
—
—
Active for 2
seconds
(pipipi···)
Intelligent Key
button opera-
tion
When Intelligent Key button is pushed
(lock operation) under the following con-
ditions.
• Door switch: ON (Any door is open).
• Ignition switch is in ACC or OFF posi-
tion or ignition knob is pressed in
LOCK position or mechanical key is
inserted into ignition key cylinder.
—
—
Active for 2
seconds
(pipipi···)
Intelligent Key low battery
warning
When Intelligent Key battery voltage is
low, Intelligent Key unit is detected after
ignition switch is turned ON.
“KEY”
(GREEN blink-
ing for 30 sec-
onds)
—
—
Warning/Information functions
Operation conditions
Warning lamp
Warning chime
Combination
meter buzzer
Intelligent Key
warning buzz-
er
Behavior of lamps
Operation condition
KEY
GREEN
Lighting
All the following conditions are satisfied.
• Ignition knob is pushed in LOCK position. (Ignition knob switch is ON)
• Ignition key is removed from ignition key cylinder. (Key switch is OFF)
• Intelligent Key is detected inside of the vehicle.
• KEY RED lighting/blinking conditions are not satisfied.
Blinking
while Intelligent Key low battery warning is operating.
RED
Lighting
All the following conditions are satisfied.
• Ignition knob is pushed. (Ignition knob switch is ON)
• Ignition key is removed from ignition key cylinder. (Key switch is OFF)
• Intelligent Key is not detected inside of the vehicle.
Blinking
All the following conditions are satisfied.
• Take away warning is operating.
• KEY RED lighting condition is not satisfied.
LOCK
Blinking
while OFF position warning is operating.
KEY(RED) and LOCK lighting
All the following conditions are satisfied.
• Ignition switch is ON.
• Steering lock ID is NG.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст