Nissan Qashqai (2007-2010). Manual — part 1408
REAR COMBINATION LAMP
EXL-337
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
CAUTION:
Disconnect the battery negative terminal or the fuse.
TAIL LAMP BULB
1.
Remove the rear combination lamp.
2.
Remove the bulb cover.
3.
Turn the tail lamp bulb counterclockwise, and remove it.
REAR TURN SIGNAL LAMP BULB
1.
Remove the rear combination lamp.
2.
Remove the bulb cover.
3.
Turn the rear turn signal lamp bulb counterclockwise, and remove it.
EXL-338
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000001099408
Removal and Installation
INFOID:0000000001099409
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Insert a cards upper the high-mounted stop lamp. While pushing
the metal clip of the lamp, pull off the lamp from the vehicle.
2.
Disconnect the high-mounted stop lamp connector.
3.
Remove the rear washer tube.
INSTALLATION
Install in the reverse order of removal.
1.
Seal packing
2.
High-mounted stop lamp
Refer to
for symbols not described above.
JPLIA0258ZZ
JPLIA0259ZZ
BACK-UP LAMP
EXL-339
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BACK-UP LAMP
Exploded View
INFOID:0000000001099410
Removal and Installation
INFOID:0000000001099411
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Remove back door trim finisher lower. Refer to
2.
Disconnect back-up lamp connector.
3.
Remove back-up lamp mounting nuts. And then remove back-up lamp.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
Replacement
INFOID:0000000001099412
CAUTION:
Disconnect the battery negative terminal or the fuse.
BACK-UP LAMP BULB
1.
Remove back door trim finisher lower. Refer to
2.
Disconnect the back-up lamp connector.
3.
Turn the bulb socket (1) counterclockwise and unlock it.
4.
Remove the bulb (2) from the socket.
1.
Seal packing
2.
Back-up lamp
Refer to
for symbols not described above.
JPLIA0260ZZ
JPLIA0261ZZ
EXL-340
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000001099413
Removal and Installation
INFOID:0000000001099414
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
While pressing the license plate lamp to direction right side, pull it to direction outside and then remove it.
2.
Disconnect the connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000001099415
CAUTION:
Disconnect the battery negative terminal or the fuse.
LICENSE PLATE LAMP BULB
1.
Remove license plate lamp.
2.
Turn the bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the socket.
1.
License plate lamp housing
2.
License plate lamp bulb
JPLIA0262ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст