Nissan Qashqai (2007-2010). Manual — part 1310
FRONT GRILLE
EXT-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Exploded View
INFOID:0000000001093648
Removal and Installation
INFOID:0000000001093649
REMOVAL
CAUTION:
Apply protection tape around outer circumference of front grille (bumper fascia side).
1.
Fully open hood assembly.
2.
Remove front grille upper fixing clips.
3.
Slowly pull front grille upper side, and using a flat screwdriver,
remove clips (1) (LH/RH) from front bumper (2).
1.
Front grille
2.
Front grille molding
3.
Front emblem
4.
Fixing clip
Pawl
E1KIA0003ZZ
E1KIA0018ZZ
EXT-18
< ON-VEHICLE REPAIR >
FRONT GRILLE
4.
Release front grille lower pawls from front bumper.
5.
Remove front grille assembly.
6.
Remove the following parts after removing front grille.
• Front grille molding
• Front emblem
INSTALLATION
Install in the reverse order of removal.
COWL TOP
EXT-19
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
COWL TOP
Exploded View
INFOID:0000000001093650
Removal and Installation
INFOID:0000000001093651
REMOVAL
1.
Fully open hood assembly.
2.
Remove front wiper arm (LH/RH) from vehicle. Refer to
WW-104, "Removal and Installation"
3.
Remove cowl top grilles (LH/RH).
4.
Remove windscreen washer nozzle (LH/RH).
• Pull nozzle upwards (A)
• Disconnect washer nozzle tube.
CAUTION:
Fit cap on washer nozzle tube to avoid spills and contami-
nation.
1.
Cowl top assembly
2.
Cowl top cover grille
3.
Cowl top cover
4.
Cowl top seal
5.
Front fender cover
6.
Cowl top foam insulator
7.
Upper dash assembly
Clip
E1KIA0004ZZ
E1KIA0019ZZ
EXT-20
< ON-VEHICLE REPAIR >
COWL TOP
5.
Release foam insulator (A) from front fender (LH/RH).
6.
Remove cowl top cover fixing clips, then pull forward to release cowl top cover from windscreen.
7.
Turn cowl top cover upside down to access main windscreen
washer tubes (A).
8.
Release main windscreen washer tubes. Remove main windscreen washer tubes.
CAUTION:
Fit cap on washer nozzle tube to avoid spills and contamination.
9.
Remove cowl top cover.
• Remove washer tube nozzles.
• Remove cowl top seal.
10. Remove front fender cover fixing clip (A).
• Push foam insulator to side to release front fender cover fixing
tape.
• Release front fender cover pawl from front pillar.
INSTALLATION
Install in the reverse order of removal.
E1KIA0020ZZ
E1KIA0021ZZ
E1KIA0022ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст