Nissan Qashqai (2007-2010). Manual — part 979
SE-30
< ON-VEHICLE REPAIR >
REAR SEAT
REAR SEAT
Exploded View
INFOID:0000000001025094
REAR SEAT
1.
Seat cushion trim
2.
Seat cushion frame
3.
Seat cushion pad
4.
Seat cushion hook
5.
Headrest
6.
TORX bolt (T55)
7.
Bushing
8.
Seatback side bracket
9.
Seatback lock knob finisher
10. Bushing
11.
Special bolt
12. Seatback center bracket cover
13. Seatback center bracket
14. Armrest bracket cover
15. Clip
JMJIA0373GB
REAR SEAT
SE-31
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Removal and Installation
INFOID:0000000001025095
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat cushion.
Pull seat cushion up, and then remove the seat cushion from the
seat cushion hook.
2.
Remove the seatback.
• Remove the luggage side lower finisher (front). Refer to
INT-14, "Removal and Installation"
.
• Remove the seatback side bracket (RH) mounting nuts.
• Remove the seatback assembly (RH) from the vehicle.
• Remove the seatback side bracket (LH) mounting nuts.
• Remove the center seatback bracket mounting bolt and nut.
• Remove the seatback assembly (LH) from the vehicle.
3.
Remove the seat striker.
• Remove the seat striker mounting bolt.
• Remove the seat striker from the vehicle.
4.
Remove the seatback lower support.
• Remove the seatback lower support mounting bolt.
• Remove the seatback lower support from the vehicle.
5.
Remove the seatback mounting outer bracket.
• Remove the seatback mounting outer bracket mounting bolt.
• Remove the seatback mounting outer bracket from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
Disassembly and Assembly
INFOID:0000000001025096
SEATBACK
Disassembly
1.
Remove the seatback side bracket.
16. Armrest assembly
17. Headrest holder (locked)
18. Headrest holder (free)
19. Seatback trim
20. Seatback pad
21. Seatback lock assembly
22. Seatback lock rod
23. Seatback lock knob
24. Seatback frame
25. Seat striker
26. Seatback lower support
27. Seatback mounting outer bracket
Refer to
for symbols in the figure.
PIIB8352J
SE-32
< ON-VEHICLE REPAIR >
REAR SEAT
Remove the TORX bolt (T55) (A), and then seatback side
bracket (1).
2.
Remove the seatback center bracket.
Remove the special bolt (A), and then seatback center bracket
(1).
3.
Remove the armrest assembly.
• Remove the armrest bracket cover.
• Remove the clip (1).Using a driver (A).
• Remove the pins while pushing the armrest assembly (2)
toward the seat side. Remove the armrest assembly.
4.
Remove the seatback trim and seatback pad.
JMJIA0374ZZ
JMJIA0375ZZ
JMJIA0376ZZ
JMJIA0377ZZ
REAR SEAT
SE-33
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Remove the seatback lock knob finisher (1).Using a remover
tool (A).
• Remove the seatback retainer (2) on the back side of the seat-
back.
• Remove the headrest holder.
CAUTION:
Before installing headrest holder check its orien-
taion.(front/rear and right/left)
• Remove the clip, and then remove seatback trim and seatback pad from the seatback frame.
• Remove the hog rings to separate the seatback trim and seatback pad.
5.
Remove the seatback lock assembly.
• Remove the mounting bolt (A) and remove seatback lock
assembly (1).
• Remove the seatback lock knob rod (2).
6.
Remove the seatback lock knob.
While pressing pawls, remove the seatback lock knob (1) from the seatback frame.
: Pawl
JMJIA0378ZZ
JMJIA0379ZZ
PIIB4084J
JMJIA0380ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст