Nissan Qashqai (2007-2010). Manual — part 480
ENGINE DOES NOT START OR STARTS WITH DIFFICULTY
EC-1439
< SYMPTOM DIAGNOSIS >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
Check air intake system. Refer to
EM-265, "Removal and Installation"
.
Is the inspection result normal?
YES
>> GO TO 10.
NO
>> Repair or replace air intake system. Refer to
EM-265, "Removal and Installation"
10.
CHECK ELECTRIC THROTTLE CONTROL ACTUATOR
Check electric throttle control actuator. Refer to
EC-1345, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 11.
NO
>> Repair or replace.
11.
CHECK LOW PRESSURE CIRCUIT
Perform the TEST 1: LOW PRESSURE CIRCUIT CHECK. Refer to
EC-1262, "BASIC INSPECTION : Special
Repair Requirement (TEST 1: Low Pressure Fuel Supply System Check)"
>> GO TO 12.
12.
CHECK INTERNAL FUEL TRANSFER PUMP
Perform the TEST 2: INTERNAL FUEL TRANSFER PUMP CHECK. Refer to
: Special Repair Requirement (TEST 2: Internal Fuel Transfer Pump Check)"
.
>> GO TO 13.
13.
CHECK HIGH PRESSURE SUPPLY PUMP (PRESSURE CONTROL VALVE)
Perform the TEST 3: HIGH PRESSURE SUPPLY PUMP (PRESSURE CONTROL VALVE). Refer to
.
>> GO TO 14.
14.
CHECK HIGH PRESSURE SUPPLY PUMP (VOLUMETRIC CONTROL VALVE)
Perform the TEST 4: HIGH PRESSURE SUPPLY PUMP (VOLUMETRIC CONTROL VALVE). Refer to
.
>> GO TO 15.
15.
CHECK RAIL HIGH PRESSURE CONTROL CIRCUIT
Perform the TEST 5: RAIL HIGH PRESSURE CONTROL CIRCUIT CHECK. Refer to
INSPECTION : Special Repair Requirement (TEST 5: Rail High Pressure Regulation Check)"
.
>> GO TO 16.
16.
CHECK MAJOR LEAK IN FUEL INJECTORS/FUEL INJECTORS OPEN
Perform the TEST 6: MAJOR LEAK IN FUEL INJECTOR/FUEL INJECTORS OPEN. Refer to
.
>> GO TO 17.
17.
CHECK INCORRECT FUEL INJECTION QUANTITY
Perform the TEST 7: INCORRECT FUEL INJECTION QUANTITY. Refer to
Special Repair Requirement (TEST 7: Incorrect Fuel Injection Quantity)"
>> INSPECTION END
EC-1440
< SYMPTOM DIAGNOSIS >
[K9K]
STARTING DIFFICULT WITH COLD ENGINE
STARTING DIFFICULT WITH COLD ENGINE
Description
INFOID:0000000000912047
CHART 3: STARTING DIFFICULT WITH COLD ENGINE
Diagnosis Procedure
INFOID:0000000000912048
1.
CHECK ENGINE OIL LEVEL
Is the engine oil level correct?
Yes or No
Yes
>> GO TO 2.
No
>> Top up the oil.
2.
CHECK ENGINE OIL
Check the grade of engine oil. Refer to
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace engine oil. Refer to
3.
CHECK BATTERY
Check the battery. Refer to
PG-118, "Removal and Installation"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace battery. Refer to
PG-118, "Removal and Installation"
4.
CHECK STARTER MOTOR
Check the starter motor. Refer to
STR-20, "K9K MODELS : Removal and Installation"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace starter motor. Refer to
STR-20, "K9K MODELS : Removal and Installation"
5.
CHECK COMPONENT PART
Check the following.
• Engine coolant temperature sensor. Refer to
EC-1344, "Component Inspection"
.
• Fuel pump temperature sensor. Refer to
EC-1348, "Component Inspection"
• Intake air temperature sensor. Refer to
EC-1342, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace.
6.
CHECK GLOW SYSTEM
Check the glow system. Refer to
EC-1370, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace glow system. Refer to
EM-275, "Removal and Installation"
7.
CHECK LOW PRESSURE CIRCUIT
Perform the TEST 1: LOW PRESSURE CIRCUIT CHECK. Refer to
EC-1262, "BASIC INSPECTION : Special
Repair Requirement (TEST 1: Low Pressure Fuel Supply System Check)"
>> GO TO 8.
8.
CHECK INTERNAL FUEL TRANSFER PUMP
Perform the TEST 2: INTERNAL FUEL TRANSFER PUMP CHECK. Refer to
: Special Repair Requirement (TEST 2: Internal Fuel Transfer Pump Check)"
.
STARTING DIFFICULT WITH COLD ENGINE
EC-1441
< SYMPTOM DIAGNOSIS >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
>> GO TO 9.
9.
CHECK COMPRESSION PRESSURE
Check the compression pressure. Refer to
>> INSPECTION END
EC-1442
< SYMPTOM DIAGNOSIS >
[K9K]
IMPOSSIBLE TO SHUT OFF ENGINE
IMPOSSIBLE TO SHUT OFF ENGINE
Description
INFOID:0000000000912051
CHART 4: IMPOSSIBLE TO SHUT OFF ENGINE
Diagnosis Procedure
INFOID:0000000000912052
1.
CHECK ECM POWER SUPPLY AND GROUND CIRCUIT
Check ECM power supply and ground circuit. Refer to
EC-1317, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CHECK WIRING HARNESS
Visually check the condition of the engine wiring harness.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair or replace harness or connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст