Nissan Qashqai (2007-2010). Manual — part 698
SERVICE DATA AND SPECIFICATIONS (SDS)
BR-91
< SERVICE DATA AND SPECIFICATIONS (SDS)
[RHD]
C
D
E
G
H
I
J
K
L
M
A
B
BR
N
O
P
Disc rotor
Standard thickness
9.0 (0.354)
Wear limit thickness
8.0 (0.315)
Thickness variation (measured at 8 positions)
0.020 (0.0008)
Runout limit (with it attached to the vehicle)
—
PB-1
BRAKES
C
D
E
G
H
I
J
K
L
M
SECTION
PB
A
B
PB
N
O
P
CONTENTS
PARKING BRAKE SYSTEM
ON-VEHICLE MAINTENANCE . . . . . .
PARKING BRAKE SYSTEM . . . . . . . ...
Inspection and Adjustment . . . . . . . . . ....
PARKING BRAKE SHOE . . . . . . . . ...
Inspection . . . . . . . . . . . . . . . . ..
ON-VEHICLE REPAIR . . . . . . . . ..
PARKING BRAKE CONTROL . . . . . . .
Exploded View . . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . . ...
Adjustment . . . . . . . . . . . . . . . ....
PARKING BRAKE SHOE . . . . . . . . ..
Exploded View . . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . . ..
Inspection and Adjustment . . . . . . . . . ...
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
Parking Drum Brake . . . . . . . . . . . .
PB-2
< ON-VEHICLE MAINTENANCE >
PARKING BRAKE SYSTEM
ON-VEHICLE MAINTENANCE
PARKING BRAKE SYSTEM
Inspection and Adjustment
INFOID:0000000000925852
INSPECTION
Lever Stroke
• Operate the parking brake lever with a force of 196 N (20 kg, 44 lb). Check that the lever stroke is within the
specified number of notches. (Check it by listening to the clicks of the ratchet.)
• When parking brake warning lamp turns ON, check that the lever stroke is within the specified number of
notches. (Check it by listening to the clicks of the ratchet.)
Inspect Components
• Check each component for installation condition such as looseness.
• Check the device assembly for bend, damage and cracks. Replace if necessary.
• Check the cables for wear, damage and cracks. Replace if necessary.
• Check the parking brake switch, and replace it if necessary. Refer to
BRC-47, "Component Inspection"
(with
ABS),
BRC-145, "Component Inspection"
(with ESP).
ADJUSTMENT
• To perform adjustment operations, remove rear tires.
1.
Fix the disc rotor using wheel nuts.
2.
Remove the switch cover from center console.
3.
Release the parking brake lever by turning the adjusting nut (1)
with a deep socket wrench and loosening the cable.
4.
Remove the adjusting hole plug from the disc rotor. Turn the
adjuster (1) in the direction (A) as shown in the figure using a
suitable tool until the disc rotor is locked.
5.
Turn back the adjuster 7 notches from the locked position.
6.
Rotate the disc rotor to check that there is no drag. Install the
adjusting hole plug.
7.
Adjust the cable with the following procedure.
a.
Operate the parking brake lever with a force of 294 N (30 kg, 66
lb) for 10 strokes or more.
b.
Adjust the parking brake lever stroke by turning the adjusting nut
with a deep socket wrench.
CAUTION:
Never reuse the adjusting nut if the nut is removed.
Standard
Number of notches
: Refer to
PB-10, "Parking Brake Control"
Standard
Number of notches
: Refer to
PB-10, "Parking Brake Control"
JPFIB0013ZZ
JPFIB0014ZZ
PARKING BRAKE SYSTEM
PB-3
< ON-VEHICLE MAINTENANCE >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
c.
Operate the parking brake lever with a force of 196 N (20 kg, 44 lb). Check that the lever stroke is within
the specified number of notches. (Check it by listening to the clicks of the ratchet.)
d.
Rotate the disc rotor with the parking brake lever released and check that there is no drag.
Standard
Number of notches
: Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст