Nissan Qashqai (2007-2010). Manual — part 1379
FRONT FOG LAMP CIRCUIT
EXL-221
< COMPONENT DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT FOG LAMP CIRCUIT
Component Function Check
INFOID:0000000001099358
1.
CHECK FRONT FOG LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-9, "Diagnosis Description"
2.
Check that the front fog lamp is turned ON.
CONSULT-III ACTIVE TEST
1.
Select "EXTERNAL LAMP" of IPDM E/R active test item.
2.
With operating the test items, check that the front fog lamp is turned ON.
Is the front fog lamp turned ON?
YES
>> Front fog lamp circuit is normal.
NO
>> Refer to
EXL-221, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000001099359
1.
CHECK FRONT FOG LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK FRONT FOG LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the front combination lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if the fuse is fusing again.)
3.
CHECK FRONT FOG LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK FRONT FOG LAMP OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Disconnect the front combination lamp connector.
2.
Turn the ignition switch ON.
3.
Select "EXTERNAL LAMP" of IPDM E/R active test item.
FOG
: Front fog lamp ON
OFF
: Front fog lamp OFF
Unit
Location
Fuse No.
Capacity
Front fog lamp
IPDM E/R
#43
15 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E13
36
Not existed
LH
43
EXL-222
< COMPONENT DIAGNOSIS >
[HALOGEN TYPE]
FRONT FOG LAMP CIRCUIT
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK FRONT FOG LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the front combination lamp harness con-
nector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK FRONT FOG LAMP GROUND CIRCUIT OPEN CIRCUIT
Check continuity between the front combination lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front fog lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMP
Connector
Terminal
RH
E13
36
FOG
Battery
voltage
LH
43
OFF
0 V
IPDM E/R
Front combination lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E13
36
E48
1
Existed
LH
43
E30
1
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E48
2
Existed
LH
E30
2
PARKING LAMP CIRCUIT
EXL-223
< COMPONENT DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING LAMP CIRCUIT
Component Function Check
INFOID:0000000001099360
1.
CHECK PARKING LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-9, "Diagnosis Description"
2.
Check that the parking lamp is turned ON.
CONSULT-III ACTIVE TEST
1.
Select "EXTERNAL LAMP" of IPDM E/R active test item.
2.
With operating the test items, check that the parking lamp is turned ON.
Is the parking lamp turned ON?
YES
>> Parking lamp circuit is normal.
NO
>> Refer to
EXL-223, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000001099361
1.
CHECK PARKING LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK PARKING LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the front combination lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK PARKING LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK PARKING LAMP OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Disconnect the front combination lamp connector.
2.
Turn the ignition switch ON.
3.
Select "EXTERNAL LAMP" of IPDM E/R active test item.
TAIL
: Parking lamp ON
OFF
: Parking lamp OFF
Unit
Location
Fuse No.
Capacity
Parking lamp
IPDM E/R
#49
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E13
37
Not existed
LH
47
EXL-224
< COMPONENT DIAGNOSIS >
[HALOGEN TYPE]
PARKING LAMP CIRCUIT
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK PARKING LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the front combination lamp harness con-
nector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between the front combination lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front combination lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMP
Connector
Terminal
RH
E13
37
TAIL
Battery
voltage
LH
47
OFF
0 V
IPDM E/R
Front combination lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E13
37
E43
1
Existed
LH
47
E24
1
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E43
2
Existed
LH
E24
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст