Nissan Qashqai (2007-2010). Manual — part 1482
BCS-18
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
DOOR LOCK
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)
INFOID:0000000001097013
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
DATA MONITOR
*1
: For the Intelligent key equipped vehicle.
*2
: For the multi remote control system equipped vehicle.
ACTIVE TEST
Item
Description
RESET SETTING VALUE
Return a value set with WORK SUPPORT of each system to a default value in factory shipment.
Diagnosis mode
Function Description
WORK SUPPORT
Changes the setting for each system function.
DATA MONITOR
The BCM input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from BCM.
Monitor Item
Condition
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
PUSH SW
*1
Indicates [ON/OFF] condition of ignition knob switch.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
CDL LOCK SW
Indicates [ON/OFF] condition of door lock and unlock switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of door lock and unlock switch.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch (driver side).
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch (passenger side).
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
BACK DOOR SW
Indicates [ON/OFF] condition of back door switch.
KEYLESS LOCK
*2
Indicates [ON/OFF] condition of lock signal from key fob.
KEYLESS UNLOCK
*2
Indicates [ON/OFF] condition of unlock signal from key fob.
I-KEY LOCK
*1
Indicates [ON/OFF] condition of lock signal from Intelligent Key.
I-KEY UNLOCK
*1
Indicates [ON/OFF] condition of unlock signal from Intelligent Key.
UNLOCK WITH DR
This item is indicated, but not monitored.
UNLOCK SHOCK
Indicates [ON/OFF] condition of signal from air bag diagnosis unit.
• ON: During the unlock operation interlock with air bag.
• OFF: Other than above.
SHOCK SENSOR
Indicates [NOMAL/ON/OFF] condition of circuit between BCM and air bag diagnosis sen-
sor unit.
• NORMAL: Ignition switch ON. (BCM is receiving normal condition signal from air bag di-
agnosis sensor unit.)
• ON: During the receiving of air bag deployment signal from air bag diagnosis sensor
unit.
• OFF: After the receiving of air bag deployment signal from air bag diagnosis sensor unit.
VEHICLE SPEED
Displays the vehicle speed signal received from combination meter by numerical value
[km/h].
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-19
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
:
*1
For the super lock equipped vehicle.
WORK SUPPORT
REAR WINDOW DEFOGGER
REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)
INFOID:0000000001097014
Data monitor
ACTIVE TEST
BUZZER
BUZZER : CONSULT-III Function (BCM - BUZZER)
INFOID:0000000001097015
CONSULT-III FUNCTION (BCM – BUZZER)
DATA MONITOR
Test item
Description
SUPER LOCK
*1
This test is able to check super lock operation [LOCK (SET)/UNLOCK (RELEASE)].
DOOR LOCK IND
This test is able to check door lock indicator (built in door lock and unlock switch on center
console) operation [ON/OFF].
DOOR LOCK
This test is able to check door lock operation [ALL LOCK/ALL UNLOCK/DR UNLOCK/
OTHER UNLOCK].
Test item
Description
SECURITY DOOR LOCK SET
Anti hijack function mode can be changed in this mode.
• ON: Anti hijack mode is active.
• OFF: Anti hijack mode is inactive.
Monitor Item
Description
REAR DEF SW
Displays “Press (ON)/other (OFF)” status determined with the rear window defogger switch.
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
Test Item
Description
REAR DEFOGGER
Give a drive signal to the rear window defogger relay to activate it.
Test item
Diagnosis mode
Description
Buzzer
Data Monitor
Displays BCM input data in real time.
Active Test
Operation of electrical loads can be checked by sending driving signal to them.
Display item
[Unit]
Description
IGN ON SW
[On/Off]
Ignition switch (ON) status judged by ignition power supply input.
KEY ON SW
[On/Off]
Key switch status.
DOOR SW -DR
[On/Off]
Front door switch (driver side) status judged by BCM.
TAIL LAMP SW
[On/Off]
Lighting switch status judged by the lighting switch signal read with combination switch reading func-
tion.
BCS-20
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
INT LAMP
INT LAMP : CONSULT-III Function (BCM - INT LAMP)
INFOID:0000000001097016
WORK SUPPORT
BUCKLE SW
[On/Off]
Seat belt buckle switch status judged by the seat belt buckle switch signal received from combination
meter via CAN communication.
DOOR SW -AS
Front door switch (passenger side) status judged by BCM.
DOOR SW -RR
Rear door switch RH status judged by BCM.
DOOR SW -RL
Rear door switch LH status judged by BCM.
BACK DOOR SW
Back door switch status judged by BCM.
VEHICLE SPEED
[km/h]
Vehicle speed signal value received from combination meter via CAN communication.
Display item
[Unit]
Description
Display item
Description
LIGHT WARN ALM
The light reminder warning operation can be checked by operating the relevant function (On/Off).
IGN KEY WARN ALM
The key warning operation can be checked by operating the relevant function (On/Off).
KEY REMINDER WARN
The key reminder warning operation can be checked by operating the relevant function (On/Off).
JPLIA0093GB
Service item
Setting item
Setting
ROOM LAMP TIMER SET
MODE 1
0 sec.
Sets the interior room lamp ON time. (Timer operating time)
MODE 2
7.5 sec.
MODE 3*
15 sec.
MODE 4
30 sec.
SET I/L D-UNLCK INTCON
ON*
With the interior room lamp timer function
OFF
Without the interior room lamp timer function
ROOM LAMP ON TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual brightening time.
MODE 2*
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
4 sec.
MODE 6
5 sec.
MODE 7
0 sec.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-21
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
*: Initial setting
DATA MONITOR
ACTIVE TEST
ROOM LAMP OFF TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual dimming time.
MODE 2*
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
4 sec.
MODE 6
5 sec.
MODE 7
0 sec.
R LAMP TIMER LOGIC SET
MODE 1*
Interior room lamp timer activates with synchronizing all doors.
MODE 2
Interior room lamp timer activates with synchronizing the driver door
only.
Service item
Setting item
Setting
Monitor item
[Unit]
Description
IGN ON SW
[ON/OFF]
Ignition switch (ON) status judges from IGN signal (ignition power supply)
ACC SW
[ON/OFF]
Ignition switch (ACC) status judges from ACC signal (ACC power supply)
KEY ON SW
[ON/OFF]
The switch status input from key switch
PUSH SW
[ON/OFF]
Push switch status received from Intelligent Key unit by CAN communication
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch (driver side)
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch (passenger side)
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW- RL
[ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW
[ON/OFF]
The switch status input from back door switch
CDL LOCK SW
[ON/OFF]
Lock switch status input from door lock and unlock switch
CDL UNLOCK SW
[ON/OFF]
Unlock switch status input from door lock and unlock switch
I-KEY LOCK
[ON/OFF]
Lock signal status received from Intelligent Key unit by CAN communication
I-KEY UNLOCK
[ON/OFF]
Unlock signal status received from Intelligent Key unit by CAN communication
KEYLESS LOCK
[ON/OFF]
Lock signal status received from remote keyless entry receiver (integrated in the
BCM)
KEYLESS UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver (integrated in the
BCM)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст