Nissan Qashqai (2007-2010). Manual — part 1930

WCS-66

< SYMPTOM DIAGNOSIS >

THE SEAT BELT REMINDER WARNING CONTINUES SOUNDING, OR DOES

NOT SOUND

THE SEAT BELT REMINDER WARNING CONTINUES SOUNDING, OR
DOES NOT SOUND

Description

INFOID:0000000000892446

• Seat belt reminder warning does not sound.
• Seat belt reminder warning sounds continuously.

Trouble diagnosis procedure

INFOID:0000000000892447

1.

CHECK FRONT SEAT BELT BUCKLE SWITCH CIRCUIT

Perform the front seat belt buckle switch circuit inspection. Refer to

WCS-21, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair the harnesses or connectors.

2.

CHECK FRONT SEAT BELT BUCKLE SWITCH UNIT

Perform the front seat belt buckle switch unit inspection. Refer to

SBC-8, "Component Inspection"

(driver side)

or

SBC-11, "Component Inspection (seat belt buckle switch passenger side)"

(passenger side).

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace the seat belt buckle. Refer to

SB-8, "SEAT BELT BUCKLE : Removal and Installation"

.

3.

CHECK OCCUPANT DETECTION UNIT

Perform a unit inspection for the occupant detection unit. Refer to

SBC-11, "Component Inspection (occupant

detection unit)"

.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace the occupant detection unit. Refer to

SE-25, "Disassembly and Assembly"

.

WCS

THE PARKING BRAKE RELEASE WARNING CONTINUES SOUNDING, OR

DOES NOT SOUND

WCS-67

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

THE PARKING BRAKE RELEASE WARNING CONTINUES SOUNDING, OR
DOES NOT SOUND

Description

INFOID:0000000000892442

• The parking brake warning buzzer sounds continuously during vehicle travel even though the parking brake

is released.

• The parking brake warning buzzer does not sound at all even though driving the vehicle with the parking

brake applied.

Diagnosis Procedure

INFOID:0000000000892443

1.

CHECK PARKING BRAKE WARNING LAMP OPERATION

1.

Start engine.

2.

Check the operation of the parking brake warning lamp when operating the parking brake.

Is the inspection result normal?

YES

>> Replace combination meter.

NO

>> GO TO 2.

2.

CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT

Perform an inspection for the parking brake switch signal circuit. Refer to

WCS-23, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair harness or connector.

3.

CHECK PARKING BRAKE SWITCH UNIT

Perform a unit inspection for the parking brake switch. Refer to

WCS-23, "Component Inspection"

.

Is the inspection result normal?

YES

>> Replace combination meter. Refer to

MWI-72, "Removal and Installation"

.

NO

>> Replace parking brake switch.

Condition

Warning lamp status

Parking brake ON

ON

Parking brake OFF

OFF

WCS-68

< SYMPTOM DIAGNOSIS >

THE KEY WARNING DOES NOT SOUND

THE KEY WARNING DOES NOT SOUND

Description

INFOID:0000000000911528

The key warning does not sound with the ignition switch OFF, the driver door open, and the mechanical key
inserting conditions.

Diagnosis Procedure

INFOID:0000000000911529

1.

CHECK BCM INPUT SIGNAL

Connect CONSULT-III and inspect the BCM input signal. Refer to

DLK-597, "Component Function Check"

.

Is the inspection result normal?

YES

>> Replace BCM. Refer to

BCS-64, "Exploded View"

.

NO

>> GO TO 2.

2.

CHECK KEY SWITCH SIGNAL CIRCUIT

Perform an inspection for the key switch signal circuit. Refer to

DLK-597, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> Replace BCM. Refer to

BCS-64, "Exploded View"

.

NO

>> Check applicable parts, and repair or replace corresponding parts.

WCS

PRECAUTIONS

WCS-69

< PRECAUTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

PRECAUTION

PRECAUTIONS

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"

INFOID:0000000001078352

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRC and SB section of this Service Man-
ual.

WARNING:

• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.

• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SRC section.

• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.