Nissan Pathfinder (2010 year). Instruction — part 43
AV
AUXILIARY INPUT JACK
AV-151
< ON-VEHICLE REPAIR >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
AUXILIARY INPUT JACK
Removal and Installation
INFOID:0000000005570797
Removal
1. Remove the A/T finisher. Refer to
IP-12, "Removal and Installation"
2. Remove the auxiliary input jack.
Installation
Installation is in the reverse order of removal.
2010 Pathfinder
2010 Pathfinder
AV-152
< ON-VEHICLE REPAIR >
[MID AUDIO]
ANTENNA AMP.
ANTENNA AMP.
Removal and Installation
INFOID:0000000005550740
REMOVAL
1. Remove the luggage side upper and lower RH finishers. Refer to
INT-22, "Removal and Installation"
.
2. Detach the antenna amp. harness clip (D), disconnect the
antenna amp. connector (A), harness connector (B), then
remove the antenna amp. screw (C) and remove the antenna
amp. (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1228ZZ
2010 Pathfinder
2010 Pathfinder
AV
SATELLITE RADIO ANTENNA
AV-153
< ON-VEHICLE REPAIR >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SATELLITE RADIO ANTENNA
Removal and Installation
INFOID:0000000005259365
REMOVAL
1. Remove the front roof console finisher. Refer to
INT-19, "Removal and Installation"
.
2. Disconnect the satellite antenna connector.
3. Remove the satellite antenna nut.
4. Remove the satellite antenna.
INSTALLATION
Installation is in the reverse order of removal.
LKIA0679E
2010 Pathfinder
2010 Pathfinder
AV-154
< ON-VEHICLE REPAIR >
[MID AUDIO]
SATELLITE RADIO TUNER
SATELLITE RADIO TUNER
Removal and Installation
INFOID:0000000005259366
REMOVAL
1. Disconnect the battery negative terminal.
2. Disconnect the satellite radio tuner connectors.
3. Remove satellite radio tuner screws (A), and remove satellite
radio tuner from above the parking brake pedal.
INSTALLATION
Installation is in the reverse order of removal.
LKIA0684E
2010 Pathfinder
AV
REAR VIEW CAMERA
AV-155
< ON-VEHICLE REPAIR >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REAR VIEW CAMERA
Removal and Installation
INFOID:0000000005259367
Rear View Camera
REMOVAL
1. Remove the license lamp finisher. Refer to
EXT-21, "Removal and Installation"
.
2. Disconnect the rear view camera connector.
3. Detach the rear view camera harness clip.
4. Detach the rear view camera to release, then pull out to remove the rear view camera while feeding the
rear view camera harness and connector through the back door.
INSTALLATION
Installation is in the reverse order of removal.
1.
Rear view camera
A.
Rear view camera connector
B.
Rear view camera harness clip
ALNIA1182ZZ
2010 Pathfinder
2010 Pathfinder
AV-156
< ON-VEHICLE REPAIR >
[MID AUDIO]
REAR VIEW CAMERA CONTROL UNIT
REAR VIEW CAMERA CONTROL UNIT
Removal and Installation
INFOID:0000000005259368
REMOVAL
1. Remove the luggage side lower finisher RH. Refer to
INT-22, "Removal and Installation"
2. Remove the rear HVAC duct tube (C103) fastener and remove the HVAC duct tube.
3. Remove the rear view camera control unit screws (A), discon-
nect the rear view camera control unit connector (B) and remove
the rear view camera control unit (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0377ZZ
2010 Pathfinder
2010 Pathfinder
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-157
< BASIC INSPECTION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000005259369
OVERALL SEQUENCE
DETAILED FLOW
1.
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the
incident/malfunction occurred).
>> GO TO 2
2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition
when the symptom is detected.
>> GO TO 3
3.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
ALNIA0182GB
2010 Pathfinder
2010 Pathfinder
AV-158
< BASIC INSPECTION >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS AND REPAIR WORKFLOW
Is malfunctioning part detected?
YES
>> GO TO 4
NO
>> GO TO 2
4.
REPAIR OR REPLACE THE MALFUNCTIONING PART
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors disconnected during Diagnostic Procedure.
>> GO TO 5
5.
FINAL CHECK
Refer to confirmed symptom in step 2, and make sure that the symptom is not detected.
Was the repair confirmed?
YES
>> Inspection End.
NO
>> GO TO 2
2010 Pathfinder
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст