Nissan Pathfinder (2010 year). Instruction — part 86
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-17
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BCM : CONSULT-III Function (BCM - BCM)
INFOID:0000000005255741
WORK SUPPORT
DOOR LOCK
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)
INFOID:0000000005255742
WORK SUPPORT
DATA MONITOR
1: With remote keyless entry system
2: With Intelligent Key
ACTIVE TEST
Item
Description
RESET SETTING VALUE
Return a value set with WORK SUPPORT of each system to a default value in factory shipment.
Work Item
Description
DOOR LOCK-UNLOCK SET
• ON
• OFF
ANTI-LOCK OUT SET
• ON
• OFF
AUTOMATIC DOOR LOCK SELECT
• SHIFT OUT OF P
• VH SPD
AUTOMATIC DOOR UNLOCK SE-
LECT
• MODE1
• MODE2
• MODE3
• MODE4
• MODE5
• MODE6
AUTOMATIC LOCK/UNLOCK SE-
LECT
• ON
• OFF
Monitor Item
[Unit}
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position
KEY ON SW [ON/OFF]
Indicates condition of key switch
CDL LOCK SW [ON/OFF]
Indicates condition of door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Indicates condition of door lock and unlock switch
DOOR SW-DR [ON/OFF]
Indicates condition of front door switch LH
DOOR SW-AS [ON/OFF]
Indicates condition of front door switch RH
DOOR SW-RR [ON/OFF]
Indicates condition of rear door switch RH
DOOR SW-RL [ON/OFF]
Indicates condition of rear door switch LH
BACK DOOR SW [ON/OFF]
Indicates condition of back door switch
KEY CYL LK-SW [ON/OFF]
Indicates condition of lock signal from door key cylinder switch
KEY CYL UN-SW [ON/OFF]
Indicates condition of unlock signal from door key cylinder switch
KEYLESS LOCK
1
[ON/OFF]
Indicates condition of lock signal from keyfob
KEYLESS UNLOCK
1
[ON/OFF]
Indicates condition of unlock signal from keyfob
I-KEY LOCK
2
[ON/OFF]
Indicates condition of lock signal from Intelligent Key
I-KEY UNLOCK
2
[ON/OFF]
Indicates condition of unlock signal from Intelligent Key
2010 Pathfinder
BCS-18
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
REAR WINDOW DEFOGGER
REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)
INFOID:0000000005255743
DATA MONITOR
ACTIVE TEST
BUZZER
BUZZER : CONSULT-III Function (BCM - BUZZER)
INFOID:0000000005255744
DATA MONITOR
ACTIVE TEST
INT LAMP
Test Item
Description
DOOR LOCK
This test is able to check door lock operation [ALL LOCK/ALL UNLOCK/DR UNLOCK/
OTHER UNLOCK].
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position
ACC ON SW [ON/OFF]
Indicates condition of ignition switch in ACC position
REAR DEF SW [ON/OFF] Displays “Press (ON)/other (OFF)” status determined with the rear window defogger switch
Test Item
Description
REAR DEFOGGER
This test is able to check rear window defogger operation. Rear window defogger operates
when ’ON" on CONSULT-III screen is touched
Monitor Item
[Unit]
Description
DOOR SW -DR [ON/OFF]
Front door switch (driver side) status judged by BCM
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged by ignition power supply input
KEY ON SW [ON/OFF]
Key switch status
LIGHT SW 1ST [ON/OFF]
Lighting switch status judged by the lighting switch signal read with combination switch reading func-
tion
BUCKLE SW [ON/OFF]
Seat belt buckle switch status
Test Item
Description
SEAT BELT WARN TEST
The seat belt warning operation can be checked by operating the relevant function (On/Off).
LIGHT WARN ALM
The light reminder warning operation can be checked by operating the relevant function (On/Off).
IGN KEY WARN ALM
The key reminder warning operation can be checked by operating the relevant function (On/Off).
2010 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-19
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
INT LAMP : CONSULT-III Function (BCM - INT LAMP)
INFOID:0000000005255745
WORK SUPPORT
* : Initial setting
DATA MONITOR
JPLIA0093GB
Work Item
Setting item
Setting
SET I/L D-UNLCK INTCON
ON*
With the interior room lamp timer function
OFF
Without the interior room lamp timer function
ROOM LAMP ON TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual brightening time.
MODE 2*
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
4 sec.
MODE 6
5 sec.
MODE 7
0 sec.
ROOM LAMP OFF TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual dimming time.
MODE 2*
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
4 sec.
MODE 6
5 sec.
MODE 7
0 sec.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judges from IGN signal (ignition power supply)
KEY ON SW [ON/OFF]
The switch status input from key switch
DOOR SW-DR [ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS [ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR [ON/OFF]
The switch status input from rear door switch RH
DOOR SW- RL [ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW [ON/OFF]
The switch status input from back door switch
KEY CYL LK-SW [ON/OFF]
Lock switch status input from door lock and unlock switch
KEY CYL UN-SW [ON/OFF]
Lock switch status input from door lock and unlock switch
2010 Pathfinder
BCS-20
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
1: With remote keyless entry
2: With Intelligent Key
ACTIVE TEST
MULTIREMOTE ENT
MULTIREMOTE ENT : CONSULT-III Function (BCM - MULTIREMOTE ENT)
INFOID:0000000005255746
WORK SUPPORT
CDL LOCK SW [ON/OFF]
Lock switch status input from door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Unlock switch status input from door lock and unlock switch
KEYLESS LOCK
1
[ON/OFF]
Lock signal status received from remote keyless entry receiver (integrated in the
BCM)
KEYLESS UNLOCK
1
[ON/OFF]
Unlock signal status received from remote keyless entry receiver (integrated in the
BCM)
I-KEY LOCK
2
[ON/OFF]
Lock signal status received from Intelligent Key unit by CAN communication
I-KEY UNLOCK
2
[ON/OFF]
Unlock signal status received from Intelligent Key unit by CAN communication
Monitor Item
[Unit]
Description
Test Item
Operation
Description
IGN ILLUM
ON
Outputs the ignition keyhole illumination control signal to turn the ignition keyhole il-
lumination lamp ON.
OFF
Stops the ignition keyhole illumination control signal to turn the ignition keyhole illu-
mination lamp OFF.
INT LAMP
ON
Outputs the interior room lamp control signal to turn the interior room lamps ON.
OFF
Stops the interior room lamp control signal to turn the interior room lamps OFF.
STEP LAMP TEST
ON
Outputs the step lamp control signal to turn the step lamps ON.
OFF
Stops the step lamp control signal to turn the step lamps OFF.
LUGGAGE LAMP TEST
ON
Outputs the luggage lamp control signal to turn the luggage lamp ON.
OFF
Stops the luggage lamp control signal to turn the luggage lamp OFF.
Test Item
Description
REMO CONT ID REGIST
Keyfob ID code can be registered.
REMO CONT ID ERASUR
Keyfob ID code can be erased.
REMO CONT ID CONFIR
It can be checked whether keyfob ID code is registered or not in this mode.
HORN CHIRP SET
Horn chirp function mode can be changed in this mode. The function mode will be changed when
"CHANG SETT" on CONSULT-III screen is touched.
HAZARD LAMP SET
Hazard lamp function mode can be changed in this mode. The function mode will be changed when
"CHANG SETT" on CONSULT-III screen is touched.
MULTI ANSWER BACK SET
Hazard and horn reminder mode can be changed in this mode. The reminder mode will be changed
when “CHANG SETT” on CONSULT-III screen is touched.
AUTO LOCK SET
Auto locking function mode can be changed in this mode. The function mode will be changed when
"CHANG SETT" on CONSULT-III screen is touched.
PANIC ALRM SET
Panic alarm operation mode can be changed in this mode. The operation mode will be changed when
"CHANG SETT" on CONSULT-III screen is touched.
PW DOWN SET
Keyless power window down (open) operation mode can be changed in this mode. The operation
mode will be changed when "CHANG SETT" on CONSULT-III screen is touched.
2010 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-21
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
Hazard and horn reminder mode
Auto locking function mode
Panic alarm operation mode
Back door open operation mode
Keyless power window down operation mode
DATA MONITOR
ACTIVE TEST
MODE 1
(C mode)
MODE 2
(S mode)
MODE 3
MODE 4
MODE 5
MODE 6
Keyfob
operation
Lock
Unlock
Lock
Unlock
Lock
Unlock
Lock
Unlock
Lock
Unlock
Lock
Unlock
Hazard warning
lamp flash
Twice
Once
Twice
—
—
—
Twice
Once
Twice
—
—
Once
Horn sound
Once
—
—
—
—
—
—
—
Once
—
Once
—
MODE 1
MODE 2
MODE 3
Auto locking function
5 minutes
Nothing
1 minute
MODE 1
MODE 2
MODE 3
Keyfob operation
0.5 seconds
Nothing
1.5 seconds
MODE 1
MODE 2
MODE 3
Keyfob operation
0.5 seconds
Nothing
0.5 seconds
MODE 1
MODE 2
MODE 3
Keyfob operation
3 seconds
Nothing
5 seconds
Monitored Item
Description
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch RH.
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch LH.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
KEYLESS PANIC
Indicates [ON/OFF] condition of panic signal from keyfob.
KEYLESS UNLOCK
Indicates [ON/OFF] condition of unlock signal from keyfob.
KEYLESS LOCK
Indicates [ON/OFF] condition of lock signal from keyfob.
KEY CYL LK-SW
Indicates [ON/OFF] condition of lock signal from door key cylinder switch.
KEY CYL UN-SW
Indicates [ON/OFF] condition of unlock signal from door key cylinder switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of unlock signal from lock/unlock switch.
CDL LOCK SW
Indicates [ON/OFF] condition of lock signal from lock/unlock switch.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
RKE LCK-UNLCK
Indicates [ON/OFF] condition of lock/unlock signal at the same time from keyfob.
RKE KEEP UNLK
Indicates [ON/OFF] condition of unlock signal from keyfob.
2010 Pathfinder
BCS-22
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
HEADLAMP
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)
INFOID:0000000005255747
WORK SUPPORT
*: Initial setting
DATA MONITOR
Test Item
Description
FLASHER
This test is able to check right and left hazard reminder operation. The right hazard lamp turns on
when “RH” on CONSULT-III screen is touched and the left hazard lamp turns on when "LH" on CON-
SULT-III screen is touched.
POWER WINDOW DOWN
This test is able to check power window down operation. The windows are lowered when “ON” on
CONSULT-III screen is touched.
HORN
This test is able to check panic alarm and horn reminder operations. The alarm activate for 0.5 sec-
onds after “ON” on CONSULT-III screen is touched.
DOOR LOCK
This test is able to check door lock operation. The doors lock and unlock based on the item on CON-
SULT-III screen touched.
Work Item
Setting item
Setting
BATTERY SAVER SET
ON*
With the exterior lamp battery saver function
OFF
Without the exterior lamp battery saver function
CUSTOM A/LIGHT SET-
TING
MODE1*
Normal
MODE2
More sensitive setting than normal setting (Turns ON earlier than normal operation.)
MODE3
More sensitive setting than MODE 2 (Turns ON earlier than MODE 2.)
MODE4
Less sensitive setting than normal setting (Turns ON later than normal operation.)
ILL DELAY SET
MODE1*
45 sec.
Sets delay timer function timer operation time
(All doors closed)
MODE2
Without the func-
tion
MODE3
30 sec.
MODE4
60 sec.
MODE5
90 sec.
MODE6
120 sec.
MODE7
150 sec.
MODE8
180 sec.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
ACC ON SW [ON/OFF]
Ignition switch (ACC) status judged from ACC signal (accessory power supply)
HI BEAM SW [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
HEAD LAMP SW 1 [ON/OFF]
HEAD LAMP SW 2 [ON/OFF]
LIGHT SW 1ST [ON/OFF]
AUTO LIGHT SW [ON/OFF]
PASSING SW [ON/OFF]
FR FOG SW [ON/OFF]
TURN SIGNAL R [ON/OFF]
TURN SIGNAL L [ON/OFF]
2010 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-23
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WIPER
WIPER : CONSULT-III Function (BCM - WIPER)
INFOID:0000000005255748
WORK SUPPORT
*: Factory setting
DATA MONITOR
DOOR SW-DR [ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS [ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR [ON/OFF]
The switch status input from rear door switch RH
DOOR SW-RL [ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW [ON/OFF]
The switch status input from back door switch
CARGO LAMP SW [ON/OFF]
Cargo lamp status that BCM judges from the vehicle condition
OPTICAL SENSOR [ON/OFF]
The value of exterior brightness voltage input from the optical sensor
Monitor Item
[Unit]
Description
Test Item
Operation
Description
TAIL LAMP
ON
Transmits the position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.
OFF
Stops the tail lamp request signal transmission.
HEAD LAMP
HI
Transmits the high beam request signal with CAN communication to turn
the headlamp (HI).
LO
Transmits the low beam request signal with CAN communication to turn
the headlamp (LO).
OFF
Stops the high & low beam request signal transmission.
FR FOG LAMP
ON
Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.
OFF
Stops the front fog lights request signal transmission.
CARGO LAMP
ON
Transmits the cargo lamp request signal to IPDM E/R with CAN commu-
nication to turn the each lamp ON.
OFF
Stops the day time running light request signal transmission.
Work Item
Setting
Item
Description
WIPER SPEED
SETTING
ON*
With vehicle speed
(Front wiper intermittent time linked with the vehicle speed and wiper intermittent dial position)
OFF
Without vehicle speed
(Front wiper intermittent time linked with the wiper intermittent dial position)
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch ON status judged from ignition power supply
IGN SW CAN [ON/OFF]
Ignition switch ON status received from IPDM E/R with CAN communication
FR WIPER HI [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
FR WIPER LOW [ON/OFF]
FR WIPER INT [ON/OFF]
FR WASHER SW [ON/OFF]
INT VOLUME [1 - 7]
Each switch status that BCM judges from the combination switch reading function
2010 Pathfinder
BCS-24
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
FLASHER
FLASHER : CONSULT-III Function (BCM - FLASHER)
INFOID:0000000005255749
DATA MONITOR
ACTIVE TEST
AIR CONDITIONER
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER)
INFOID:0000000005255750
DATA MONITOR
FR WIPER STOP [ON/OFF]
Front wiper motor (stop position) status received from IPDM E/R with CAN communica-
tion
VEHICLE SPEED [km/h]
The value of the vehicle speed signal received from combination meter with CAN com-
munication
RR WIPER ON [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
RR WIPER INT [ON/OFF]
RR WASHER SW [ON/OFF]
RR WIPER STOP [ON/OFF]
Rear wiper motor (stop position) status input from the rear wiper motor
Monitor Item
[Unit]
Description
Test Item
Operation
Description
FR WIPER
HI
Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to op-
erate the front wiper HI operation.
LO
Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to
operate the front wiper LO operation.
INT
Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to
operate the front wiper INT operation.
OFF
Stops transmitting the front wiper request signal to stop the front wiper operation.
RR WIPER
ON
Outputs the voltage to operate the rear wiper motor.
OFF
Stops the voltage to stop.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
HAZARD SW [ON/OFF]
The switch status input from the hazard switch
TURN SIGNAL R [ON/OFF]
Each switch condition that BCM judges from the combination switch reading function
TURN SIGNAL L [ON/OFF]
BRAKE SW [ON/OFF]
The switch status input from the brake switch
Test Item
Operation
Description
FLASHER
RH
Outputs the voltage to turn the right side turn signal lamps ON.
LH
Outputs the voltage to turn the left side turn signal lamps ON.
OFF
Stops the voltage to turn the turn signal lamps OFF.
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст