Nissan Tiida C11. Instruction — part 412
EC-298
< COMPONENT DIAGNOSIS >
[HR16DE (WITH EURO-OBD)]
P2138 APP SENSOR
2.
Check ground connection E15. Refer to Ground Inspection in
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace ground connection.
2.
CHECK APP SENSOR 1 POWER SUPPLY CIRCUIT
1.
Disconnect accelerator pedal position (APP) sensor harness connector.
2.
Turn ignition switch ON.
3.
Check the voltage between APP sensor harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 3.
3.
DETECT MALFUNCTINING PART
• Harness or connectors E7, M69, M25, M201 (RHD models).
• Harness for open or short between ECM and APP sensor.
>> Repair open circuit or short to ground or shot to power in harness or connectors.
4.
CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-I
1.
Turn ignition switch ON.
2.
Check the voltage between APP sensor harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 9.
NO
>> GO TO 5.
5.
CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-II
1.
Turn ignition switch OFF.
2.
Disconnect ECM harness connector.
3.
Check the continuity between APP sensor harness connector and ECM harness connector.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO6.
6.
DETECT MALFUNCTINING PART
• Harness or connectors E7, M69, M25, M201 (RHD models).
• Harness for open or short between ECM and APP sensor.
>> Repair open circuit or short to ground or shot to power in harness or connectors.
APP sensor
Ground
Voltage
Connector
Terminal
E12 (LHD models)
M204 (RHD models)
4
Ground
Approx. 5V
APP sensor
Ground
Voltage
Connector
Terminal
E12 (LHD models)
M204 (RHD models)
5
Ground
Approx. 5V
APP sensor
ECM
Continuity
Connector
Terminal
Connector
Terminal
E12 (LHD models)
M204 (RHD models)
5
E16
102
Existed
P2138 APP SENSOR
EC-299
< COMPONENT DIAGNOSIS >
[HR16DE (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
7.
CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-III
Check harness for short to power and short to ground, between the following terminals.
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Repair short to ground or short to power in harness or connectors.
8.
CHECK COMPONENTS
Check the following.
• Crankshaft position sensor (POS) (Refer to
EC-200, "Component Inspection"
• Refrigerant pressure sensor (Refer to
.)
Is the inspection result normal?
YES
>> GO TO 15.
NO
>> Replace malfunctioning component.
9.
CHECK APP SENSOR GROUND CIRCUIT FOR OPEN AND SHORT
1.
Turn ignition switch OFF.
2.
Disconnect ECM harness connector.
3.
Check the continuity between APP sensor harness connector and ECM harness connector as follows.
4.
Also check harness for short to ground and short to power.
Is the inspection result normal?
YES
>> GO TO 11.
NO
>> Repair open circuit or short to ground or shot to power in harness or connectors.
10.
DETECT MALFUNCTINING PART
• Harness or connectors E7, M69, M25, M201 (RHD models).
• Harness for open or short between ECM and APP sensor.
>> Repair open circuit or short to ground or shot to power in harness or connectors.
11.
CHECK APP SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
1.
Check the continuity between APP sensor harness connector and ECM harness connector as follows.
2.
Also check harness for short to ground and short to power.
Is the inspection result normal?
YES
>> GO TO 13.
NO
>> GO TO 12.
ECM
Sensor
Connector
Terminal
Item
Connector
Terminal
F11
74
Refrigerant pressure sensor
E17
3
75
CKP sensor (POS)
F15
1
E16
102
APP sensor
E12 (LHD models)
M204 (RHD models)
5
APP sensor
ECM
Continuity
Connector
Terminal
Connector
Terminal
E12 (LHD models)
M204 (RHD models)
2
E16
111
Existed
1
104
APP sensor
ECM
Continuity
Connector
Terminal
Connector
Terminal
E12 (LHD models)
M204 (RHD models)
3
E16
110
Existed
6
103
EC-300
< COMPONENT DIAGNOSIS >
[HR16DE (WITH EURO-OBD)]
P2138 APP SENSOR
12.
DETECT MALFUNCTINING PART
• Harness or connectors E7, M69, M25, M201 (RHD models).
• Harness for open or short between ECM and APP sensor.
>> Repair open circuit or short to ground or shot to power in harness or connectors.
13.
CHECK APP SENSOR
EC-300, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 15.
NO
>> GO TO 14.
14.
REPLACE ACCELERATOR PEDAL ASSEMBLY
1.
Replace accelerator pedal assembly.
2.
Go to
EC-300, "Special Repair Requirement"
.
>> INSPECTION END
15.
CHECK INTERMITTENT INCIDENT
GI-55, "Intermittent Incident"
>> INSPECTION END
Component Inspection
INFOID:0000000001671081
1.
CHECK ACCELERATOR PEDAL POSITION SENSOR
1.
Reconnect all harness connectors disconnected.
2.
Turn ignition switch ON.
3.
Check the voltage between ECM harness connector terminals as follows.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
REPLACE ACCELERATOR PEDAL ASSEMBLY
1.
Replace accelerator pedal assembly.
2.
Go to
EC-300, "Special Repair Requirement"
.
>> INSPECTION END
Special Repair Requirement
INFOID:0000000001671082
1.
PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to
EC-26, "ACCELERATOR PEDAL RELEASED POSITION LEARNING : Special Repair Requirement"
.
>> GO TO 2.
2.
PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
(+)
(–)
Condition
Voltage
Connector
Terminal
Connector
Terminal
E16
110
(APP sensor 1 signal)
E16
111
Accelerator pedal
Fully released
0.6 - 0.9V
Fully depressed
3.9 - 4.7V
103
(APP sensor 2 signal)
104
Fully released
0.3 - 0.6V
Fully depressed
1.95 - 2.4V
P2138 APP SENSOR
EC-301
< COMPONENT DIAGNOSIS >
[HR16DE (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
EC-27, "THROTTLE VALVE CLOSED POSITION LEARNING : Special Repair Requirement"
>> GO TO 3.
3.
PERFORM IDLE AIR VOLUME LEARNING
EC-27, "IDLE AIR VOLUME LEARNING : Special Repair Requirement"
>> END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст