Nissan Tiida C11. Instruction — part 208
DLK-242
< BASIC INSPECTION >
[WITH I-KEY & SUPER LOCK]
DIAGNOSIS AND REPAIR WORKFLOW
9.
REPAIR OR REPLACE THE MALFUNCTIONING PART
1.
Repair or replace the malfunctioning part.
2.
Reconnect parts or connectors disconnected during Diagnostic Procedure again after repair and replace-
ment.
3.
Check DTC. If DTC is displayed, erase it.
>> GO TO 10.
10.
FINAL CHECK
When DTC was detected in step 2, perform DTC Confirmation Procedure or Component Function Check
again, and then check that the malfunction have been repaired securely.
When symptom was described from the customer, refer to confirmed symptom in step 3 or 4, and check that
the symptom is not detected.
Does the symptom reappear?
YES (DTC is detected)>>GO TO 8.
YES (Symptom remains)>>GO TO 6.
NO
>> INSPECTION END
INSPECTION AND ADJUSTMENT
DLK-243
< BASIC INSPECTION >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000001396668
Perform the system initialization when replacing Intelligent Key unit, replacing Intelligent Key or registering an
additional Intelligent Key.
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement
INFOID:0000000001396669
Refer to the CONSULT-III Operation Instruction-NATS.
DLK-244
< FUNCTION DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
DOOR LOCK FUNCTION
FUNCTION DIAGNOSIS
DOOR LOCK FUNCTION
DOOR LOCK AND UNLOCK SWITCH
DOOR LOCK AND UNLOCK SWITCH : System Diagram
INFOID:0000000001396670
DOOR LOCK AND UNLOCK SWITCH OPERATION
DOOR LOCK AND UNLOCK SWITCH INDICATOR OPERATION
DOOR LOCK AND UNLOCK SWITCH : System Description
INFOID:0000000001396671
DOOR LOCK AND UNLOCK SWITCH OPERATION
Functions available by operating the door lock and unlock switch on driver or passenger door. Interlocked with
the lock/unlock operation of door lock and unlock switch, door lock actuators of all doors are locked/unlocked.
Operation Condition
If the following conditions are not satisfied, door lock/unlock operation is not performed even if the door lock
and unlock switch is operated.
ALKIA0710GB
JMKIA0408GB
DOOR LOCK FUNCTION
DLK-245
< FUNCTION DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
NOTE:
When the door lock is locked with Intelligent Key or door request switch (in super lock set state), door lock and
unlock switch operation will be invalid until either following condition is satisfied.
• Turn ignition switch ON.
• Unlock with Intelligent key or door request switch.
DOOR LOCK AND UNLOCK SWITCH INDICATOR OPERATION
Door lock and unlock switch indicator indicates door lock status. The indicator turn ON while ignition switch is
ON and door lock is locked or super lock is set. If any door is opened, the indicator will turn OFF.
Door lock and unlock switch indicator have the following 2 functions.
1 Minute Timer
A timer must be running to turn OFF the indicator. The timer will be running for 1 minute after super lock set or
lock with Intelligent Key, door request switch or auto door lock.
30 Minutes Timer
A timer must be running to turn OFF the indicator. The timer will be running for 30 minutes after locking with
door lock and unlock switch.
NOTE:
1 minute timer condition is satisfied during 30 minutes timer is active, 30 minutes timer is not change to 1
minute.
Door lock and unlock switch
Operation condition
Lock operation
Following all conditions are satisfied.
• Except driver side doors are closed.
• Doors are not locked with Intelligent Key or door request switch.
Unlock operation
Following all conditions are satisfied.
• Doors are not locked with Intelligent Key or door request switch.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст