Nissan Tiida C11. Instruction — part 1197
SRC-16
< COMPONENT DIAGNOSIS >
B1049 - B1052 DRIVER AIR BAG MODULE
3.
DTC
If DTC is detected. Refer to
SRC-16, "Diagnosis Procedure (Component diagnosis)"
.
>> END
DTC CONFIRMATION PROCEDURE (Without CONSULT-lll)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 2
2.
IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
>> GO TO 3
3.
WAIT TIME
Wait more than 3 seconds.
>> GO TO 4
4.
REPEAT STEPS
Repeat steps 1 to 3 twice.
>> GO TO 5.
5.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 6.
6.
DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to
.
>> END
Diagnosis Procedure (Component diagnosis)
INFOID:0000000001396367
Recheck SRS after each replacement.
1.
HARNESS CONNECTOR
Is there any visible damage to the connector?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 2
2.
WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 3
B1049 - B1052 DRIVER AIR BAG MODULE
SRC-17
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
3.
DRIVER AIR BAG MODULE
Replace the driver air bag module. Refer to
SR-4, "Removal and Installation"
.
>> GO TO 4
4.
SPIRAL CABLE
Replace the spiral cable. Refer to
SR-7, "Removal and Installation"
.
>> GO TO 5
5.
AIR BAG DIAGNOSIS SENSOR UNIT
Replace the air bag diagnosis sensor unit. Refer to
SR-15, "Removal and Installation"
>> GO TO 6
6.
RELATED HARNESS
Replace the related harness.
>> END
SRC-18
< COMPONENT DIAGNOSIS >
B1065 - B1068 PASSENGER AIR BAG MODULE
B1065 - B1068 PASSENGER AIR BAG MODULE
Description
INFOID:0000000001396368
DTC B1065 – B1068 PASSENGER AIR BAG MODULE
The passenger air bag module is single stage and wired to the air bag diagnosis sensor unit. The air bag diag-
nosis sensor unit will monitor for opens and shorts in detected lines to the passenger air bag module.
PART LOCATION
SRC-7, "SRS Component Parts Location"
DTC Logic
INFOID:0000000001396369
DTC DETECTION LOGIC
With CONSULT-lll
Without CONSULT-lll
DTC CONFIRMATION PROCEDURE (With CONSULT-lll)
1.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 2
2.
CONSULT-III
Select "DIAG MODE".
>> GO TO 3
3.
DTC
If DTC is detected. Refer to
SRC-19, "Diagnosis Procedure (Component diagnosis)"
.
>> END
CONSULT-III name
DTC
DTC detecting condition
Repair order
ASSIST A/B MODULE
[OPEN]
B1065
Front passenger air bag module circuit
(AS1) is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front passenger air bag module.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
ASSIST A/B MODULE
[VB-SHORT]
B1066
Front passenger air bag module circuit
(AS1) is shorted to a power supply circuit.
ASSIST A/B MODULE
[GND-SHORT]
B1067
Front passenger air bag module circuit
(AS1) is shorted to ground.
ASSIST A/B MODULE
[SHORT]
B1068
Front passenger air bag module circuits
(AS1) are shorted to each other.
WHIA0261E
B1065 - B1068 PASSENGER AIR BAG MODULE
SRC-19
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DTC CONFIRMATION PROCEDURE (Without CONSULT-lll)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 2
2.
IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
>> GO TO 3
3.
WAIT TIME
Wait more than 3 seconds.
>> GO TO 4
4.
REPEAT STEPS
Repeat steps 1 to 3 twice.
>> GO TO 5
5.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 6
6.
DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to
.
>> END
Diagnosis Procedure (Component diagnosis)
INFOID:0000000001396370
Recheck SRS after each replacement.
1.
HARNESS CONNECTOR
Is there any visible damage to the connector?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 2
2.
WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 3
3.
FRONT PASSENGER AIR BAG MODULE
Replace the front passenger air bag module. Refer to
SR-9, "Removal and Installation"
.
>> GO TO 4
4.
AIR BAG DIAGNOSIS SENSOR UNIT
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст