Nissan Tiida C11. Instruction — part 220
DLK-290
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
DOOR LOCK AND UNLOCK SWITCH
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK PASSENGER DOOR LOCK AND UNLOCK SWITCH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect BCM connector.
3.
Check continuity between BCM connector (A) M18 terminals 6,
25 and passenger door lock/unlock switch connector (B) D105
terminals 1, 2.
4.
Check continuity between BCM connector (A) M18 terminals 6, 25 and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness.
3.
CHECK PASSENGER DOOR LOCK AND UNLOCK SWITCH GROUND
Terminal
Signal
(Reference value)
(+)
(–)
Power window and door lock/
unlock switch (passenger side)
connector
Terminal
D105
1
Ground
2
JPMIA0154GB
ALKIA0830ZZ
BCM connector
Terminal
Passenger door lock
and unlock switch
connector
Terminal
Continuity
M18
6
D105
1
Yes
25
2
BCM connector
Terminal
Ground
Continuity
M18
6
No
25
DOOR LOCK AND UNLOCK SWITCH
DLK-291
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Check continuity between power window and door lock/unlock
switch (passenger side) connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
4.
CHECK BCM OUTPUT SIGNAL
1.
Connect BCM connector.
2.
Check signal between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
CHECK DOOR LOCK AND UNLOCK SWITCH
Check door lock and unlock switch
Refer to
DLK-292, "PASSENGER SIDE : Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Replace power window and door lock/unlock switch (passenger side). Refer to
XX-XX, "*****"
.
ALKIA0831ZZ
Power window and door lock/unlock switch
(passenger side) connector
Terminal
Ground
Continuity
D105
3
Yes
ALKIA0739ZZ
Terminal
Signal
(Reference value)
(+)
(–)
BCM connector
Terminal
M18
6
Ground
25
JPMIA0154GB
DLK-292
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
DOOR LOCK AND UNLOCK SWITCH
6.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
PASSENGER SIDE : Component Inspection
INFOID:0000000001530498
1.
CHECK DOOR LOCK AND UNLOCK SWITCH
Check continuity between power window and door lock/unlock
switch (passenger side) terminals.
Is the inspection result normal?
YES
>> Power window and door lock/unlock switch (passenger side) is OK.
NO
>> Replace power window and door lock/unlock switch (passenger side). Refer to
XX-XX, "*****"
.
WIIA1108E
Door lock and unlock switch
Terminals
Condition
Continuity
D105
1
3
LOCK
Yes
NEUTRAL/UNLOCK
No
2
UNLOCK
Yes
NEUTRAL/LOCK
No
INSTRUMENT PANEL WARNING LAMP ASSEMBLY
DLK-293
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INSTRUMENT PANEL WARNING LAMP ASSEMBLY
Description
INFOID:0000000001396732
The door lock and unlock switch indicates door lock status. The indicator will illuminate when a lock operation
is accomplished, and during this status, if any door is opened, the indicator will turn OFF.
Component Function Check
INFOID:0000000001396733
1.
CHECK FUNCTION
With CONSULT-III
Check “DOOR LOCK IND” in “Active Test” mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock and unlock switch is OK.
NO
>> Refer to
DLK-293, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000001396734
1.
CHECK DOOR LOCK AND UNLOCK SWITCH INDICATOR INPUT SIGNAL
Lock and unlock the door lock system using the main power window and door lock/unlock switch.
Does the door lock system operate properly?
YES
>> GO TO 2.
NO
>> Repair the power door lock system. Refer to
.
2.
CHECK DOOR LOCK AND UNLOCK SWITCH INDICATOR INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Open and keep the driver door open for the duration of this test.
3.
Disconnect instrument panel warning lamp assembly.
4.
Check voltage between instrument panel warning lamp assem-
bly connector M37 terminals 3 and 5.
Is the inspection result normal?
YES
>> Replace instrument panel warning lamp.
NO
>> GO TO 3.
Test item
Condition
DOOR LOCK IND
:ON
Illuminated
:OFF
Not illuminated
ALKIA0832ZZ
Instrument panel warning lamp assembly connector
Condition
Voltage
(Approx.)
Terminals
3 (+)
5(-)
Press the door lock switch to the
LOCK position
Battery voltage
Press the door lock switch to the
UNLOCK position
0
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст