Nissan Tiida C11. Instruction — part 35
BCS-4
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
• When replacing BCM, you must perform WRITE CONFIGURATION with CONSULT-III.
• Complete the procedure of WRITE CONFIGURATION in order.
• If you set incorrect WRITE CONFIGURATION, incidents will occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
CONFIGURATION : Special Repair Requirement
INFOID:0000000001451452
1.
WRITING VEHICLE SPECIFICATION
Perform “WRITE CONFIGURATION” with CONSULT-III.
When writing saved data>>GO TO 2
When writing instructionly>>GO TO 3
2.
PERFORM “WRITE CONFIGURATION - CONFIG FILE”
Perform “WRITE CONFIGURATION - Config file” with CONSULT-III.
>> WORK END
3.
PERFORM “WRITE CONFIGURATION - MANUAL SELECTION”
For “WRITE CONFIGURATION - Instruction selection”, using the following flow chart, identify the correct model
and configuration list.
Confirm and/or change setting value for each item according to the configuration list.
Depending on CONSULT-III software version being used, some or all of the write configuration items shown in
the following configuration lists may be displayed. If an item does not display on the CONSULT-III “WRITE
CONFIGURATION - Instruction selection” screen, then it is an auto setting item and it cannot be instructionly set or
changed.
• Gasoline engine models (RHD)
• Gasoline engine models (LHD)
MANUAL SETTING ITEM
Items
Setting value
HANDLE
RHD
PTC HEATER
WITHOUT
AUTO LIGHT
WITH
⇔
WITHOUT
KEYLESS ENTRY
WITH
⇔
WITHOUT
DTRL
WITHOUT
THEFT ALARM
WITH
⇔
WITHOUT
AUTO SETTING ITEM
RAIN SENSOR
WITH or WITHOUT
H/L WSR SWTRG
FR WSR SW
H/L_BULB
H4 HALOGEN or DEFAULT
FR FOG LAMP
WITH or WITHOUT
DONGLE
WITH or WITHOUT
SUPER LOCK
WITH
I-KEY
WITH or WITHOUT
DOOR/L SPEED
WITH
H/L BAT SAVER
WITH
KEY WARNING
MODE1
R LAMP LOGIC
MODE2
BCS
INSPECTION AND ADJUSTMENT
BCS-5
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
• Diesel engine models (RHD)
• Diesel engine models (LHD)
MANUAL SETTING ITEM
Items
Setting value
HANDLE
LHD
PTC HEATER
WITHOUT
AUTO LIGHT
WITH
⇔
WITHOUT
KEYLESS ENTRY
WITH
⇔
WITHOUT
DTRL
WITH
⇔
WITHOUT
THEFT ALARM
WITHOUT
AUTO SETTING ITEM
RAIN SENSOR
WITH or WITHOUT
H/L WSR SWTRG
FR WSR SW
H/L_BULB
H4 HALOGEN or DEFAULT
FR FOG LAMP
WITH or WITHOUT
DONGLE
WITH or WITHOUT
SUPER LOCK
WITHOUT
I-KEY
WITH or WITHOUT
DOOR/L SPEED
WITH
H/L BAT SAVER
WITH
KEY WARNING
MODE1
R LAMP LOGIC
MODE2
MANUAL SETTING ITEM
Items
Setting value
HANDLE
RHD
PTC HEATER
WITHOUT
AUTO LIGHT
WITH
⇔
WITHOUT
KEYLESS ENTRY
WITH
⇔
WITHOUT
DTRL
WITHOUT
THEFT ALARM
WITH
⇔
WITHOUT
AUTO SETTING ITEM
RAIN SENSOR
WITH or WITHOUT
H/L WSR SWTRG
FR WSR SW
H/L_BULB
H4 HALOGEN or DEFAULT
FR FOG LAMP
WITH or WITHOUT
DONGLE
WITH or WITHOUT
SUPER LOCK
WITH
I-KEY
WITH or WITHOUT
DOOR/L SPEED
WITH
H/L BAT SAVER
WITH
KEY WARNING
MODE1
R LAMP LOGIC
MODE2
BCS-6
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
>> WORK END
MANUAL SETTING ITEM
Items
Setting value
HANDLE
LHD
PTC HEATER
2 PTC
AUTO LIGHT
WITH
⇔
WITHOUT
KEYLESS ENTRY
WITH
⇔
WITHOUT
DTRL
WITH
⇔
WITHOUT
THEFT ALARM
WITHOUT
AUTO SETTING ITEM
RAIN SENSOR
WITH or WITHOUT
H/L WSR SWTRG
FR WSR SW
H/L_BULB
H4 HALOGEN or DEFAULT
FR FOG LAMP
WITH or WITHOUT
DONGLE
WITH or WITHOUT
SUPER LOCK
WITHOUT
I-KEY
WITH or WITHOUT
DOOR/L SPEED
WITH
H/L BAT SAVER
WITH
KEY WARNING
MODE1
R LAMP LOGIC
MODE2
BCS
BODY CONTROL SYSTEM
BCS-7
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
FUNCTION DIAGNOSIS
BODY CONTROL SYSTEM
System Description
INFOID:0000000001451453
OUTLINE
• BCM (Body Control Module) controls the various electrical components. It inputs the information required to
the control from CAN communication and the signal received from each switch and sensor.
• BCM has combination switch reading function for reading the operation status of combination switches (light,
turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical com-
ponents. It also has the signal transmission function as the passed point of signal and the power consump-
tion control function that reduces the power consumption with the ignition switch OFF.
• BCM is equipped with the diagnosis function that performs the diagnosis with CONSULT-III and various set-
tings.
BCM control function list
System
Refer to
Combination switch reading system
Signal buffer system
Power consumption control system
Auto light system
Turn signal and hazard warning lamp system
Headlamp system
Front fog lamp system
Rear fog lamp system
Daytime light system
Interior room lamp control system
Interior room lamp battery saver system
INL-12, "BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAV-
ER)"
Front wiper and washer system
Rear wiper and washer system
Headlamp washer system
Warning chime system
WCS-4, "WARNING CHIME SYSTEM : System Diagram"
Door lock system
• WITH I-KEY, WITHOUT SUPER LOCK:
• WITH I-KEY & SUPER LOCK:
DLK-244, "DOOR LOCK AND UNLOCK
• WITHOUT I-KEY & SUPER LOCK:
• WITHOUT I-KEY, WITH SUPER LOCK:
(NATS) Nissan anti-theft system
• WITH INTELLIGENT KEY SYSTEM:
• WITHOUT INTELLIGENT KEY SYSTEM:
Rear window defogger system
Remote keyless entry system
• WITHOUT I-KEY & SUPER LOCK:
• WITHOUT I-KEY, WITH SUPER LOCK:
Intelligent Key system
• WITH I-KEY, WITHOUT SUPER LOCK:
• WITH I-KEY & SUPER LOCK:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст