Nissan Tiida C11. Instruction — part 333
DLK-742
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY, WITH SUPER LOCK]
FRONT FENDER
FRONT FENDER
Removal and Installation
INFOID:0000000001732058
REMOVAL
1.
Remove the headlamp assemblies. Refer to
EXL-84, "Removal and Installation"
2.
Remove the cowl top cover (LH/RH). Refer to
EXT-20, "Removal and Installation"
.
3.
Remove the front fender protector. Refer to
DLK-742, "Removal and Installation"
.
4.
Remove the bolt and the front fender.
CAUTION:
While removing use a shop cloth to protect the vechicle body from damage.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After installing, apply touch-up paint onto the head of the front fender bolts.
• After installing, check front fender adjustment. Refer to
and
1.
Front fender
2
Bolt (LH 7 bolts required) (RH 8 bolts
required)
LIIA2657E
DOOR
DLK-743
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY, WITH SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR
Fitting Adjustment
INFOID:0000000001732059
FRONT DOOR
Longitudinal Clearance and Surface Height Adjustment at Front End
Access from inside the fender to loosen the hinge bolts. Raise the front door at rear end to adjust.
Surface Height Adjustment
Loosen the front door bolts, and adjust the surface height difference of fender and front door according to the
fitting standard dimension.
Striker Adjustment
1.
Front fender
2.
Front door outer
3.
Rear door outer
4.
Rear fender
5.
Front door weatherstrip
6.
Front door sash
7.
Rear door weatherstrip
8.
Rear door sash
PIIB6516E
DLK-744
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY, WITH SUPER LOCK]
DOOR
1.
REAR DOOR
Longitudinal Clearance and Surface Height Adjustment at Front End
1.
Remove the center pillar upper and lower garnishes. Refer to
INT-20, "Removal and Installation"
.
2.
Access from inside the vehicle to loosen the hinge nuts. Open the rear door, and raise the rear door at
rear end to adjust.
Surface Height Adjustment
Loosen the front door striker bolts and rear door hinge nuts, and adjust the surface height difference of front
and rear doors according to the fitting standard dimension.
Striker Adjustment
1.
BACK DOOR
Longitudinal Clearance and Surface Height Adjustment
16.7 N·m (1.7 kg-m, 12 ft-lb)
PIIB2804J
16.7 N·m (1.7 kg-m, 12 ft-lb)
PIIB2804J
DOOR
DLK-745
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY, WITH SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Open and support the back door.
2.
Slightly loosen the hinge nuts.
3.
Reposition the door as necessary and tighten the nuts.
4.
Confirm the adjustment. Repeat as necessary to obtain the desired fit.
Striker Adjustment
1.
Back door assembly
2.
Back door hinge
3.
Tail lamp assembly
4.
Back window glass
5.
Roof
6.
Rear pillar
A.
6.0
±
1.0 mm (0.24
±
0.04 in)
B.
-0.5
±
1.0 mm (-0.02
±
0.04 in)
C. 5.0
±
1.2 mm (0.20
±
0.05 in)
D.
0.0
±
1.5 mm (0.0
±
0.06 in)
E.
5.0
±
2.3 mm ( 0.20
±
0.9 in)
F.
2.7 +1.6 -2.1 mm (0.11 + 0.06 - 0.08 in)
G.
5.0
±
1.2 mm ( 0.20
±
0.05 in)
H. 0.0
±
1.5 mm (0.0
±
0.06 in)
LIIA2668E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст