Nissan Tiida C11. Instruction — part 782
ROOF SIDE MOLDING
EXT-23
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
ROOF SIDE MOLDING
Component
INFOID:0000000001568933
Hatchback Models
Sedan Models
Removal and Installation
INFOID:0000000001568934
REMOVAL
1.
Using a suitable tool, release the rear roof side molding clip and remove.
2.
Lift up rear edge of roof side molding working forward.
3.
Release front roof side molding clip, then remove roof side molding.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
WIIA1408E
1.
Roof side molding
A.
Front roof side molding clip
B.
Rear roof side molding clip
WIIA1409E
1.
Roof side molding
A.
Front roof side molding clip
B.
Rear roof side molding clip
EXT-24
< ON-VEHICLE REPAIR >
ROOF SIDE MOLDING
Make sure front edge of roof side molding contacts windshield mold-
ing with no gap.
NOTE:
For Setting the new clip A or B, use EPoxy Adhesive DP-100C made
by 3M. For adhesive DP-100C application use an applicator 9170
EPX W 1:1 and mixer nozzle 9742 EPX 50ML made by 3M.
PIIB2599J
DOOR OUTSIDE MOLDING
EXT-25
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
DOOR OUTSIDE MOLDING
Component
INFOID:0000000001568935
Hatchback Models
WIIA1410E
1.
Front door outside molding
2.
Rear door outside molding
3.
Rear door corner cover
C.
Clip C101
EXT-26
< ON-VEHICLE REPAIR >
DOOR OUTSIDE MOLDING
Sedan Models
Removal and Installation
INFOID:0000000001568936
FRONT DOOR OUTSIDE MOLDING
Removal
1.
Open front door window.
2.
Remove front door outside molding screw.
3.
While pulling up on front of front door outside molding, insert a
suitable tool beneath the molding and release it from the door
top edge.
WIIA1411E
1.
Front door outside molding
2.
Rear door outside molding
3.
Rear door corner cover
C.
Clip C101
PIIB3386J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст