Nissan Tiida C11. Instruction — part 1415
FINAL DRIVE
TM-711
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
FINAL DRIVE
Exploded View
INFOID:0000000001381659
Disassembly
INFOID:0000000001381660
1.
Remove differential side bearing inner race (clutch housing side)
(1) using the drift (A) [SST: ST33061000] and a puller.
2.
Remove speedometer drive gear.
3.
Remove final gear mounting bolts (1), and then separate the
final gear (2) from differential case.
4.
Remove differential side bearing inner race (transaxle case
side) (1) using the drift (A) [Commercial service tool] and a suit-
able puller.
5.
Remove lock ring (1) from differential case.
6.
Remove pinion mate shaft, pinion mate gears, side gears and
thrust washer from differential case.
Assembly
INFOID:0000000001381661
1.
Install pinion mate shaft, pinion mate gears, side gears and thrust washer into differential case.
PCIB1767E
PCIB1766E
JPDIC0114ZZ
PCIB1764E
TM-712
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
FINAL DRIVE
2.
Install lock ring (1) onto differential case.
CAUTION:
Make sure that lock ring is securely installed in the groove.
3.
Install final gear into differential case, and tighten final gear
mounting bolts to the specified torque.
4.
Install speedometer drive gear onto differential case.
5.
Press-fit the differential side bearing inner race (clutch housing
side) onto the differential case using the drift (A) [Commercial
service tool] and press.
CAUTION:
Replace differential side bearing inner race and differential
side bearing outer race as a set.
6.
Press-fit the differential side bearing inner race (transaxle case
side) onto the differential case using the drift (A) [Commercial
service tool] and press.
CAUTION:
Replace differential side bearing inner race and differential
side bearing outer race as a set.
Inspection
INFOID:0000000001381662
GEAR, WASHER, SHAFT AND CASE
Check side gears, thrust washer, pinion mate shaft, pinion mate
gears, lock ring and differential case. If necessary, replace with a
new one.
BEARING
PCIB1764E
JPDIC0115ZZ
JPDIC0116ZZ
PCIB0977J
FINAL DRIVE
TM-713
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Check for bearing damage and rough rotation. If necessary, replace
with a new one.
CAUTION:
When replacing tapered roller bearing, replace outer and inner
races as a set.
SPD715
TM-714
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
SHIFT FORK AND FORK ROD
SHIFT FORK AND FORK ROD
Exploded View
INFOID:0000000001381663
Disassembly
INFOID:0000000001381664
for disassembly procedure.
Assembly
INFOID:0000000001381665
for assembly procedure.
Inspection
INFOID:0000000001381666
FORK ROD AND SHIFT FORK
Check contact surface and sliding surface of fork rod and shift fork
for wear, damage, and bend. Replace if necessary.
SCIA7785E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст