Nissan Tiida C11. Instruction — part 232
DLK-338
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
DOOR LOCK ACTUATOR
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
CHECK BACK DOOR LOCK ACTUATOR HARNESS
1.
Disconnect BCM and back door lock assembly.
2.
Check continuity between BCM connector (A) M20 terminal 68
and back door lock assembly connector (B) D405 terminal 1.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK BACK DOOR LOCK ACTUATOR GROUND CIRCUIT
Check continuity between back door lock assembly connector D405
terminal 2 and ground.
Is the inspection result normal?
YES
>> Replace back door lock assembly.
NO
>> Repair or replace harness.
4.
CHECK DOOR LOCK ACTUATOR HARNESS
1.
Disconnect BCM and back door lock actuator.
Connector
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(-)
M20
68
Ground
Door lock opener switch is pressed
0
→
Battery voltage
→
0
ALKIA0780ZZ
BCM connector
Terminal
Back door lock assembly
connector
Terminal
Continuity
M20
68
D405
1
Yes
Terminals
Continuity
2
Ground
Yes
ALKIA0781ZZ
DOOR LOCK ACTUATOR
DLK-339
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Check continuity between BCM connector M20 terminals 68 and
ground.
Is the inspection result normal?
YES
>> Harness is OK. Refer to
DLK-339, "BACK DOOR : Component Inspection"
NO
>> Repair or replace harness.
BACK DOOR : Component Inspection
INFOID:0000000001530335
1.
CHECK TRUNK LAMP SWITCH
Momentarilly, connect battery power supply to back door lock
assembly terminals and check for actuator operation.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
XX-XX, "*****"
.
NO
>> Replace back door lock assembly.
Terminals
Continuity
68
Ground
No
ALKIA0782ZZ
ALKIA0779ZZ
Terminal
Back door condition
Back door lock assembly (actuator)
1 BAT (+)
2 BAT (-)
Actuator operates
DLK-340
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
SUPER LOCK ACTUATOR
SUPER LOCK ACTUATOR
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000001530411
The super lock system is controlled by the BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000001530412
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test "SUPER LOCK".
2.
Touch “LOCK” or “UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Front super lock actuator (driver side) is OK.
NO
>> Refer to
DLK-340, "DRIVER SIDE : Diagnosis Procedure"
.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000001530413
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
1.
Turn ignition switch OFF.
2.
Check voltage between BCM connector M20 terminals 75, 76
and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK SUPER LOCK ACTUATOR HARNESS
1.
Disconnect BCM and front door lock actuator (driver side).
ALKIA0822ZZ
Connector
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(-)
M20
75
Ground
Driver door lock/unlock switch is
turned to LOCK
0
→
Battery voltage
→
0
76
Driver door lock/unlock switch is
turned to UNLOCK
0
→
Battery voltage
→
0
SUPER LOCK ACTUATOR
DLK-341
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Check continuity between BCM connector (A) M20 terminals 75,
76 and front door lock actuator (driver side) connector (B) D14
terminals 1, 2.
Is the inspection result normal?
YES
>> Replace super lock actuator (driver side).
NO
>> Repair or replace harness.
3.
CHECK SUPER LOCK ACTUATOR HARNESS
1.
Disconnect BCM and front door lock actuator (driver side).
2.
Check continuity between BCM connector M20 terminals 75, 76
and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
XX-XX, "*****"
.
NO
>> Repair or replace harness.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000001530414
The super lock system is controlled by the BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000001530415
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test DOOR LOCK.
2.
Touch “LOCK” or “UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Front super lock actuator (passenger side) is OK.
NO
>> Refer to
DLK-341, "PASSENGER SIDE : Diagnosis Procedure"
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000001530416
1.
CHECK FRONT DOOR LOCK ACTUATOR (PASSENGER SIDE) SIGNAL
1.
Turn ignition switch OFF.
Connector
Terminals
Connector
Terminals
Continuity
M20
75
D14
1
Yes
76
2
Yes
ALKIA0823ZZ
Connector
Terminals
Continuity
M20
75
Ground
No
76
No
ALKIA0824ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст