Nissan Tiida C11. Instruction — part 1421
VTL-20
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
INTAKE DOOR MOTOR
INTAKE DOOR MOTOR
Removal and Installation
INFOID:0000000001696288
REMOVAL
1.
Remove the instrument lower finisher and instrument lower cover (LH) for LHD only. Refer to
2.
Remove the glove box assembly and instrument lower cover (RH) for RHD only. Refer to
3.
Disconnect the intake door motor connector (A).
4.
Remove the intake door motor screws (B), and then remove the
intake door motor (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position reset by following self-diagnosis
STEP-3. Refer to
HAC-213, "Front Air Control Self-Diagnosis"
SJIA0692E
AIR MIX DOOR MOTOR
VTL-21
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
AIR MIX DOOR MOTOR
Removal and Installation
INFOID:0000000001696289
REMOVAL
1.
Remove the instrument lower finisher and instrument lower cover (LH) for LHD only. Refer to
2.
Remove the glove box assembly and instrument lower cover (RH) for RHD only. Refer to
3.
Remove the console box assembly. Refer to
IP-11, "Removal and Installation"
.
4.
Remove the instrument stay nuts (A) and harness clamps (B),
and then remove instrument stay (1).
5.
Remove the air mix door motor screws (A), and then pull out the
air mix door motor (1).
6.
Disconnect the air mix door motor connector and remove the air
mix door motor (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position reset by following self-diagnosis
STEP-3. Refer to
HAC-213, "Front Air Control Self-Diagnosis"
.
SJIA0646E
SJIA0695E
VTL-22
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
MODE DOOR MOTOR
MODE DOOR MOTOR
Removal and Installation
INFOID:0000000001696290
REMOVAL
1.
Remove the glove box assembly and instrument lower cover (RH) for LHD only. Refer to
2.
Remove the instrument lower finisher and instrument lower cover (LH) for RHD only. Refer to
3.
Remove the mode door motor screws (A), and then pull out the
mode door motor (1).
4.
Disconnect mode door motor connector and remove the mode
door motor (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position reset by following self-diagnosis
STEP-3. Refer to
HAC-213, "Front Air Control Self-Diagnosis"
SJIA0694E
DUCTS AND GRILLES
VTL-23
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
DUCTS AND GRILLES
Removal and Installation
INFOID:0000000001696358
NOTE:
A LHD vehicle shown, RHD vehicle similar
Instrument Panel Ducts
Floor Ducts
SJIA0657E
1.
Side defroster duct (right)
2.
Defroster nozzle
3.
Side defroster duct (left)
4.
Side defroster grille (left)
5.
Instrument side panel (left)
6.
Instrument panel and pad
7.
Side ventilator assembly (left)
8.
Cluster lid C
9.
Side ventilator assembly (right)
10. Instrument finisher E
11. Instrument side panel (right)
12. Side defroster grille (right)
13. Side ventilator duct (right)
14. Center ventilator duct (right)
15. Center ventilator duct (left)
16. Side ventilator duct (left)
WJIA2198E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст