Nissan Tiida C11. Instruction — part 1154
REAR SEAT
SE-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
60:40 SPLIT FOLD DOWN FIXED SEAT
7.
Armrest
8.
Armrest insert
9.
Outer hinge cover
10. Seatback hinge
11. Inner hinge cover
12. Seatback hinge assembly
13. Seat cushion trim and pad
14. Rear leg base cover
15. Sliding seat frame rail
16. Front leg base cover
17. Seat cushion frame
18. Left seatback frame
19. Left seatback pad and trim
WBIA0849E
SE-18
< REMOVAL AND INSTALLATION >
REAR SEAT
Removal and Installation
INFOID:0000000001710908
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
60:40 SPLIT FOLD DOWN FIXED SEAT
Removal
1.
Pull seat cushion up, and then remove the seat cushion from the
seat cushion hook. Slide the seat cushion forward.
2.
Remove the center seatbelt anchor bolt (A) from under the seat
and slide the seatbelt through the seat cushion trim cover.
3.
Fold the right seatback and remove the seatback mounting bolts
(A) from the left rear seat back brackets. Remove the seatback
from the vehicle.
1.
Seat cushion trim
2.
Seat cushion pad
3.
Seatback side
4.
Armrest
5.
Rear seat bushing
6.
Armrest hinge cover
7.
Headrest
8.
Headrest holder (free)
9.
Headrest holder (locked)
10. Striker cover
11. Seatback trim
12. Seatback pad
13. Rear seatback lock knob
14. Rear seat lock assembly
15. Seatback frame
16. Rear seatback center bracket
17. Rear seatback side bracket
18. Rear seat striker
19. Seat cushion hook
20. Seatbelt guide
PIIB4085J
WIIA1380E
WIIA1382E
REAR SEAT
SE-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
4.
Fold the left seatback and remove the seatback mounting bolts
(A) from the left rear seat back brackets. Remove the seatback
from the vehicle.
5.
Remove the kicking plate rear inner. Refer to
INT-20, "Removal and Installation"
6.
Remove the bolt under the seatback side.
7.
Pull seatback side up, and then remove seatback side.
8.
Remove the bolts, and then remove rear seatback center bracket.
9.
Remove the bolt, and then remove rear seatback side bracket
from the vehicle.
10. Remove the rear seatback finisher. Refer to
INT-20, "Removal and Installation"
11. Remove the bolts, and then remove the rear seat striker.
Installation
Installation is the reverse order of removal. Be careful of the following point.
• Seatback assembly and rear seatback side bracket installation procedure.
WIIA1383E
PIIB2482J
PIIB2483J
PIIB2484J
SE-20
< REMOVAL AND INSTALLATION >
REAR SEAT
1.
Install the rear seatback side bracket in the vehicle.
2.
Temporarily tighten the seatback assembly and rear seatback side bracket.
3.
Lift to fold up seatback assembly. Be sure to lock seatback assembly to rear seat striker.
4.
Tighten the bolt.
NOTE:
Confirm that side hinge bracket location pin is set to the hole on the seatback backside.
Removal and Installation
INFOID:0000000001710910
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
60:40 SPLIT FOLD DOWN SLIDING SEAT
Removal
1.
Remove the front leg covers. Remove the front anchor bolts.
2.
Remove the rear leg covers. Remove the front anchor bolts.
3.
Remove the seat assembly.
Installation
Installation is the reverse order of removal.
PIIB2484J
WIIA1307E
WIIA1380E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст